Filter
Top Products
189
Chapter 10. Memory Settings (Utility Mode)
Chapter 10
Formatting the Memory Card for
the XV-88 (FORMAT)
This function initializes (formats) a memory card so that XV-
88 data can be saved to it. Before a new memory card or a
memory card used on another device can be used on the XV-
88, it must be formatted on the XV-88.
fig.10-31
Please be aware that formatting will erase all the data
currently stored on the memory card.
Renaming a File (RENAME)
This operation allows you to change the name of a file
already stored on the memory card.
fig.10-32.e
You can assign the file a name of up to eight characters.
For details on assigning names, refer to “Assigning a
Name” (p. 28).
The file name extension (.SVD) cannot be changed.
Deleting Unwanted Files (DELETE)
Use this operation to delete unwanted files from a memory
card.
fig.10-33
Copying Files Between Memory
Cards (FILE COPY)
Use FILE COPY to copy files stored on one memory card to
another memory card.
• The copy destination memory card must already be
formatted (p. 189).
• Insert and remove memory cards used in the FILE COPY
procedure only as directed by the on-display
instructions. Using other procedures can damage the
memory cards, rendering them unusable.
1. Select “4. FILE COPY” in the CARD page to display a
screen like the following.
fig.10-34
2. Insert the memory card containing the file you want to
copy in the MEMORY CARD slot and press [ENTER].
3. Use the VALUE dial, [INC/+]/[DEC/-] or numeric keys
to select the file you want to copy, then press [ENTER].
The following display will appear.
fig.10-35
4. Insert the copy destination card and press [ENTER].
The following display will appear.
fig.10-36.e
5. Specify the number of copy destination file. When
necessary, change the name of copy destination file. You
can assign the file a name of up to eight characters.
For details on assigning names, refer to “Assigning a
Name” (p. 28).
6. Press [ENTER] to execute the File Copy, and the
following display will appear.
fig.10-37
To continue on, and copy more files, press [ENTER]. To
exit the operation, press [EXIT].
Original file name
New file name
Copy source (file number : file name)
Copy destination (file number : file name)