Filter
Top Products
196
Chapter 11. Using the XV-88 as a GM Sound Module (GM Mode)
Rx Sw (Receive Switch)
Specifies whether each Part will receive Note messages (ON),
or not (OFF).
You can also set the Rx Sw parameter on the GM PLAY
page. Press ZONE/PART SELECT [1/9]–[8/16] to
switch the setting to ON (indicator lighted), or OFF
(indicator extinguished). When the [1-8/9-16] indicator
is extinguished, Parts 1–8 are switched on and off, and
when the [1-8/9-16] indicator is lit, Parts 9–16 are
switched on and off (p. 25).
Mute Sw (Mute Switch)
Mute Sw temporarily mutes (ON) or releases the mute (OFF)
for the performance of each Part.
Use this setting when, for example, you want to use the
instrument for karaoke by muting the Part playing the
melody, or when you want to play something using a
separate sound module.
The Mute Sw parameter does not turn the Part off, but
rather mutes the sound by setting the volume to 0.
Therefore, MIDI messages are still received.
Making Settings for Each Part
(PART)
Here you can select the GM Patch/Rhythm Set assigned to
each Part, and set the volume, pan, and pitch of each Part.
PATCH
fig.11-07
Type (Part Type)
Sets the assignment of a GM Patch (PAT) or GM Rhythm Set
(RHY) to each of the Parts.
Number (GM Patch/Rhythm Set Number)
Selects the desired GM Patch or Rhythm Set by its number.
The name of the selected GM Patch/Rhythm Set appears in
parentheses.
In GM mode, Patches or Rhythm Sets other than the GM
Patches and Rhythm Sets in PR-H cannot be selected.
Furthermore, GM Patches and Rhythm Sets cannot be
edited.
SETTING
fig.11-08
Volume (Part Volume)
Adjusts the volume of an individual Part. This setting’s main
purpose is to adjust the volume balance between Parts.
Pan (Part Pan)
Adjusts the pan of each Part. L64 is far left, 0 is center, and
63R is far right.
If you modify the settings of the Volume parameter or
Pan parameter, they will be reflected in the INFO page
(p. 197).
Coarse (Part Coarse Tune)
Adjusts the pitch of the Part’s sound up or down in semitone
steps (+/-4 octaves).
Fine (Part Fine Tune)
Adjusts the pitch of the Part’s sound up or down in 1-cent
steps (+/-50 cents).
One cent is 1/100th of a semitone.
MODIFY
fig.11-09
Cutoff (Part Cutoff Frequency Offset)
Adjusts the cutoff frequency for the GM Patch or Rhythm Set
assigned to a Part.
Resonance (Part Resonance Offset)
Adjusts the Resonance for the GM Patch or Rhythm Set
assigned to a Part.
Attack (Part Attack Time Offset)
Adjusts the TVA Envelope Attack Time for the GM Patch or
Rhythm Set assigned to a Part.
Release (Part Release Time Offset)
Adjusts the TVA Envelope Release Time for the GM Patch or
Rhythm Set assigned to a Part.