Filter
Top Products
130
Using tap tempo control
In Program, Combination, Sequencer, and Song Play
modes, you can use the tap tempo function to control the
arpeggiator tempo. In Sequencer and Song Play modes
you can use this method to control the song tempo.
During playback, lightly press the [ENTER] key several
times at the desired tempo. The tempo will follow your
tapping in realtime. This is a convenient way to match the
tempo in realtime to the beat of a different source.
As an example, here’s the procedure for using tap tempo
to set the speed of the arpeggiator.
1 In Program mode or Combination mode, start the
arpeggiator running.
Turn on the ARPEGGIATOR [ON/OFF] key, and play
the keyboard. If you check “Latch” (P0: Play, Arpeggia-
tor page), the arpeggiator will keep running even if
you take your hand off the keyboard.
2 Lightly press the [ENTER] key several times at the
desired tempo.
Notice that the “ =” in the upper right of the LCD
screen will change to indicate the tempo at which you
press the [ENTER] key.
If you press the [ENTER] key at slightly shorter inter-
vals, the playback tempo will become correspondingly
faster.
You can use tap tempo control whenever the
[TEMPO] knob can be operated. For example in
Sequencer mode, tap tempo control will not be avail-
able if you are playing a song whose “Tempo Mode”
setting (☞PG p.56) is set to Auto.
You can also use a foot switch connected to the
ASSIGNABLE FOOT SWITCH jack to control the tap
tempo function. (☞p.90, PG p.281)
Shortcuts
[MENU] key + numeric keys [0]–[9]
• Accesses the pages within a mode
[ENTER] key + numeric keys [0]–[9]
• Accesses the page menu commands in each page (up
to ten items)
[ENTER] key + [REC/WRITE] key
• Accesses the Song Setup function. In Program or
Combination mode you can press this combination of
keys to automatically assign the settings of the
program or combination to a song in Sequencer mode,
and then enter record-ready mode.
[ENTER] key + keyboard
• Inputs note number values or velocity values
• Selects “KEY” in Global P5: Drum Kit, Sequencer P6:
Pattern/RPPR, RPPR Setup page
• Selects base key and index in Sampling mode
[ENTER] key + [LOCATE] key
• In Sequencer mode and Song Play mode, sets the
current location as the “Location” (equivalent to the
“Set Location” page menu command)
From the powered-off state, turn on the power while
holding down the [MENU] key and [EXIT] key
• Automatically executes “Load All (Preload PCG and
Demo Songs).” (A message of “Now writing into
internal memory” will appear in the LCD screen while
the data is being loaded.)
From the powered-off state, turn on the power while
holding down the [MENU] key and [9] key
(Warning! This operation will cause all user data saved to
the internal memory to be lost)
• Initializes the TRITON Extreme, and writes data into
internal memory. (A message of “Now writing into
internal memory” will appear in the LCD screen while
the data is being loaded.)
After initialization, you will need to load the preload
data. Execute the Global mode page menu command
“Load Preload/Demo Data” to load the data. ☞p.127