Filter
Top Products
133
Program
Combination
SequencerSamplingSong PlayGlobalEffectMedia, etcPresetOther
Appendices
Program, Combination
Settings for oscillator 2 are not displayed
Make sure that the “Oscillator Mode” (Program P1:
Program Basic) parameter is set to Double.
☞
PG p.9
A combination does not play correctly after you load data
In the dialog box when you saved the data, did you
check the items that you wanted to save?
☞
PG p.187
Are the bank/numbers of the programs used by the
combination the same as when the combination was
created?
Song
A song does not play correctly after you load data
In the dialog box when you saved the data, did you
check the items that you wanted to save? ☞PG p.187
Are the programs used by the song the same as when
the song was created?
→ When saving the song, it is best to use “Save All” or
“Save PCG & SEQ” so that the programs are saved
together with the song. Then when loading, load both
the .PCG and the .SEQ data. ☞PG p.177, 187
Have you loaded the multisamples and samples used
by the program?
Does the demo song “S001: WinterVariations” not
play correctly?
→ This song uses the preloaded User Octave Scale 15.
In Global P0: Basic Setup, execute the “Load Preload/
Demo data” page menu command to select the “Global
Setting.” ☞QS p.2, PG p.157
Playback does not start when you press the SEQUENCER
[START/STOP] key in Sequencer mode
Is the “MIDI Clock” (Global P1: MIDI) set to Internal?
☞PG p.162
Can’t record in Sequencer mode
Is the Memory Protect “Song” check box (Global P0)
unchecked? ☞PG p.159
Is the “MIDI Clock” (Global P1: MIDI) set to Internal?
☞PG p.162
The arpeggiator settings that were copied from a
combination using “Copy From Combi” cannot be recorded
in the same way as when they were played
Have you checked “Multi REC”? (Sequencer P0: Play/
REC, Preference) ☞PG p.67
Depending on the settings of the combination, it may
be necessary to adjust settings such as “Track Select,”
“MIDI Channel,” “Status,” and “Arpeggiator Assign.”
☞PG p.59
→ In the Copy from Combi dialog box, check the “Auto
adjust Arp setting for Multi REC” option before you
execute the copy. This will cause the settings to be
adjusted automatically. ☞p.58
→ The settings that are made automatically by “Auto
adjust Arp setting for Multi REC” will be executed
according to the ARPEGGIATOR [ON/OFF] key set-
ting of the combination. If you want to turn on the
arpeggiator in Sequencer mode and record the perfor-
mance of a combination, make sure that the ARPEG-
GIATOR [ON/OFF] key is turned on for the
combination when you write it in Combination mode.
Then execute the “Copy From Combi.” ☞p.58
RPPR does not start
Is the Sequencer P0: Play/REC “RPPR” setting
checked? ☞p.56
Are “Assign,” “Pattern Select,” and “Track” set
correctly? ☞p.55, PG p.91
If the “MIDI Clock” (Global P1: MIDI) parameter set to
Internal? ☞PG p.162
Can’t record exclusive data
Is “Enable Exclusive” (Global P1: MIDI) checked?
☞p.46
In Song Play mode, a GM/GS/XG-compatible SMF is not
played correctly
Execute “GM Initialize” to initialize the settings.
☞PG p.144
Is “Bank Map” set to GM(2)? ☞PG p.158
Is “Status” set to INT? ☞PG p.146
Sampling
Can’t sample
Is sample memory (RAM) installed? ☞p.18
If you are sampling to media, have you selected media
to which sampling is possible? ☞p.137, PG p.7, 112
Are the audio input settings correct?
→ Refer to “Audio input and output – Can’t input sound”
☞p.131
Is there free space in memory? ☞PG p.117, 203
→ If you are sampling to sample memory (RAM), select a
different memory bank. ☞PG p.6, 41, 64, 106
→ If you are sampling to hard disk, select a different hard
disk. ☞PG p.7, 41, 64, 112
→ Delete unneeded samples. ☞PG p.108
→ Save samples you want to keep, and then delete them.
☞PG p.108, 188
Is the “Trigger” setting correct? ☞PG p.5, 41, 63, 115
In Sampling mode if you are resampling with
“Resample” set to Auto, has the sample to be
resampled been assigned to the keyboard, and selected
for “Key”? ☞p.70, PG p.113
Is the “Source BUS” setting correct?
→ If you want to listen to the performance of the internal
tone generator while sampling only the external input
sound (i.e., when using the In-Track Sampling func-
tion), you will normally set this to Indiv.1/2. For other
types of sampling or resampling, set this to L/R.
☞p.65, PG p.4, 41, 63, 115
If a message of “Buffer underrun error occurred” is
displayed frequently when you are sampling to hard
disk, execute the page menu command “Check
Medium” (Media, Utility page) to find and correct any
errors on the selected MS-DOS format media. ☞PG
p.193
A stereo sample can’t be played in stereo
Is the multisample stereo?
→ Execute the page menu command “MS Mono To Ste-
reo” to convert the multisample to stereo. ☞PG p.110
Is the sample name assigned correctly? ☞PG p.106