Filter
Top Products
Working with User Programs
132
r
E-80 Music Workstation
TXT/BMP Link
This function means that, by recalling a User Program,
you also prepare the associated TXT or BMP file and
start the PAGE TURNER function if it’s not set to “Off”.
Such a file must be available when you load the User
Program in question for this system to work.
Your E-80 only memorizes the file name. If, at the time
you recall such a User Program, that file is not available,
the display will respond with:
Remove the memory card (because the internal mem-
ory is always available), insert the proper card and
select that User Program again, then activate the
VIEWER function.
(1) Press the USER PROGRAM [LIST] button.
The display changes to:
(2) Press the [TXT÷BMP¥LINK] field.
If the User Program already contains a link to
another song, which you no longer need, press the
[DELETE¥TEXT/BMP¥LINK] field. This is not necessary
to establish a new link – it is meant to cancel an
existing link.
(3) Press [MAKE¥NEW¥TEXT/BMP¥LINK].
The display changes to:
(4) Press the [TXT¥IMPORT] or [BMP¥IMPORT] field,
depending on the kind of file you want to link to
the selected User Program.
As a reminder: “TXT” refers to text files, and “BMP” to
picture files. The following steps are the same for
both types, and therefore described only once. Bear
in mind, however, that you cannot link both a TXT
and a BMP file to a User Program.
(5) Select the memory area that contains the text file
you want to use: press [INTERNAL¥MEMORY], or
[EXTERNAL¥MEMORY].
If you press [EXTERNAL¥MEMORY], insert the mem-
ory card with the desired file into the slot.
(6) Press the field of the file you want to link to the
currently selected User Program.
(7) Press the [GET¥IT] field to establish the link to the
file whose name appears on an orange back-
ground.
This takes you back to the “User Program” page. The
selection field now contains a small or icon.
On the main page, User Programs with a link are indi-
cated by means of a picture or text file icon.
LIST