Filter
Top Products
Editing the Vocal Harmonist parts
156
r
E-80 Music Workstation
If you press the
[Common]
field…
…the display looks as follows:
See the explanations under “Small settings”.
• Press the [Back] field to leave this page.
If you press the
[EQUALIZER]
field…
…the display looks as follows:
This page contains a simple equalizer for the four
ENSEMBLE parts, as well as an EQ band that applies
to all four voices simultaneously for added flexibility.
• Press the field of the parameter you want to edit and
set the desired value with the [DATA÷ENTRY] dial or
the [DEC]/[INC] buttons.
● EQUALIZER—Press this field to switch all equalizers on
this page on or off. The equalizer can be used for two
things: (a) emphasizing a specific frequency range to
create a special effect or make the part more distin-
guishable; (b) to reduce the level of frequencies that
mask other sounds or produce a “boomy” sound. The ALL
PARTS FREQUENCY HZ parameter affects the sound of
all four parts (1~4).
● FREQUENCY Hz—Use this parameter to select the fre-
quency whose level you wish to change with the GAIN
parameter. The smaller the value, the lower the fre-
quency that will be boosted or cut.
● GAIN—This parameter sets the level of the selected fre-
quency. “0” means that the frequency’s level does not
change (no difference between equalizer on and off for
that particular part, or the overall EQ band).
• Press the [Back] field to leave this page.