Filter
Top Products
11. Press [YES].
“SNG CD Track No. OK?” is displayed.
12. Press [YES].
“Obey Copyrights?” is displayed.
13. Carefully read the License Agreement (detailed
on the back cover of this manual); if you agree to
the terms, press [YES.] Writing to the CD-R disc
begins. If you do not agree to the terms, press
[NO]. The VS-880EX just returns to the condition
at Step 2.
14. After the write procedure has been carried out
normally, “Write Another?” appears in the dis-
play. When you want to write the same song
information to another CD-R disc, insert another
disc in the CD-RW drive and press [YES].
Repeat Steps 10–14. Press [NO] to return to the condi-
tion at Step 2.
Auditioning (Test Listening) Songs
Written to CDs (CD Player Function)
You cannot playback CD-RW discs or CD-R discs that
have just had written songs to them with regular com-
mercial CD players. To listen to songs that have been
just written to a disc in order to check them, carry out
the following operation.
* Other commercially-available CD software can also be
played using the CD player function.
* You can listen to the contents of the disc through the
VS-
880EX’s MONITOR jacks or the PHONES jack.
You cannot output the contents through the CD-R drive’s
PHONES jack or AUDIO OUT jacks.
1. Insert the CD-R disc or commercial CD software
onto the CD-RW drive.
2. Press [SONG] until “SNG CD Player?” appears in
the display.
3. Press [YES].
“STORE Current?” (Store the current song?) appears
in the display.
4. If you want to store the current song press [YES];
if not, press [NO].
“-Scanning CD-RW -” appears in the display. The VS-
880EX scans for the SCSI ID of the connected CD-RW
drive. When it finds it, the ID number is displayed for
a few moments. The CD-R disc information is then
displayed.
If “Not 44.1k Song!” Appears in the
Display
The sample rate is not 44.1 kHz, so the song can-
not be written to the CD-R disc. Press [ENTER
(YES)] to return to Step 1. Please refer to
“Creating a New Song” (p. 40).
If “Please Insert Disc!” Appears in the
Display
This indicates that the CD-RW drive’s loading
tray is open, that there is no disc loaded, or that
the CD-RW drive is in some other way not ready
for use. Insert a CD-R disc, and press [YES].
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Play time
Total number of songs on the disc (9)
Number of currently-playing song (1)
Disc type (In the example, CD-R disc)
If “Please Insert Disc!” Appears in the
Display
There is no disc in the CD-RW drive. Insert a com-
mercial software CD or a CD-R disc on which
recording has been completed, press [YES], and
try the operation once more.
Chapter 8 Use with a CD-RW Drive
110