Filter
Top Products
Track Mixer
Track mixer is placed after the recorder section, and correspond to the tracks
(1–8).
All of the tracks are output from the MASTER jacks. Additionally, tracks can
also be routed back to the RECORDING bus for overdubbing, or re-rerecording.
In this status, the channel faders 1–8 correspond respectively to Tracks 1–8.
Effect Return Mixer
This mixer adjusts the return level/balance from effects connected in
send/return fashion, and the level/balance of the stereo input.
Each channel is output from the MASTER jacks. It is also possible to assign them
to the recording bus for recording. In this case, the channel faders correspond to
the following signals.
Channel 6: The INPUT jack assigned to Stereo In
Channel 7: FX1 return
Channel 8: FX2 return
EQ1 Fader1
EQ2 Fader2
Pan1
Pan2
EQ3 Fader3
EQ4 Fader4
Pan3
Pan4
EQ5 Fader5
EQ6 Fader6
Pan5
Pan6
EQ7 Fader7
EQ8 Fader8
Pan7
Pan8
Track1
Track2
Track3
Track4
Track5
Track6
Track7
Track8
REC 1 (Recorder)
REC 2 (Recorder)
REC 3 (Recorder)
REC 4 (Recorder)
REC 5 (Recorder)
REC 6 (Recorder)
REC 7 (Recorder)
REC 8 (Recorder)
MIX L/R (MASTER)
Recorder Track Mixer (Track 1–8)
REC 1
REC 2
REC 3
REC 4
REC 5
REC 6
REC 7
REC 8
Fader6 Balance6
Fade7
Balance7
Fader8 Balance8
REC 1 (Recorder)
REC 2 (Recorder)
REC 3 (Recorder)
REC 4 (Recorder)
REC 5 (Recorder)
REC 6 (Recorder)
REC 7 (Recorder)
REC 8 (Recorder)
MIX L/R (MASTER)Stereo In
FX1 Return
FX2 Retuen
FX Return Mixer (Channel 6–8)
Chapter 1 Before You Start (VS-880EX Terminology)
27
Chapter 1