When Saving to User Patches
When you save effect settings to a User Patch, the User
Patch that had previously been in that location is lost.
At the time of purchase, the effects in the VS-880EX’s
User Patches are the same as those stored in the Preset
Patches.
1. Press PARAMETER [ ].
“Save User Patch?” appears in the display.
2. Press [YES].
3. Rotate the TIME/VALUE dial to select the desti-
nation patch number (U00–U99).
4. Press [YES].
When the User Patch has been saved, the display will
indicate “Complete.”
5. Press [PLAY (DISPLAY)].
Return to Play condition.
When Storing to a Scene
For more detailed information, please refer to
“Recording the Current Condition of the Mixer
(Scene)” (p. 73).
1. Press [SCENE].
The SCENE indicator lights.
2. Press the LOC buttons ([1/5]–[4/8]) whose indi-
cators are not blinked. For example, if you want to
store the settings to Scene 1, then press [1/5]. If
you wish to store the settings in Scene 5, hold
down [SHIFT] and press [1/5].
3. Hold down [SHIFT] and press [STORE (ZERO)].
“STORE OK?” appears in the display.
4. Press [YES].
5. Press [SCENE] once more.
The SCENE indicator will go dark. If you wish to halt
the registration procedure, press [SCENE] before step
2.
6. Press [PLAY (DISPLAY)].
Return to Play condition.
About Effect Levels
Many algorithms include parameters for effect
level, which adjusts the output level of the effect
sound, and direct level, which adjusts the output
level of the direct sound. When these parameters
are preceded by a minus sign, the phase is invert-
ed.
The direct level of the Preset Patches, which were
created with careful consideration given to the
connection to the EFFECT bus, is set to “0.” When
inserting an effect into a channel, raise the direct
level. To determine the type for each Preset Patch,
please refer to “Preset Patch List” (Appendices p.
19).
Chapter 4 Using the Internal Effects
72