Filter
Top Products
36.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
37. “IN* SndPan” appears in the display. Use the
TIME/VALUE dial to adjust the send pan.
38.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
39. “Master Sel=” appears in the display. Use the
TIME/VALUE dial to select the bus (MIX, AUX,
FX1, FX2, REC) that you wish to output from the
MASTER jacks.
40.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
41. “EQ Sel=” appears in the display. Rotate the
TIME/VALUE dial.
42.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
43. “Direct Out =” appears in the display. Rotate the
TIME/VALUE dial. If you do not wish to use
Direct OUT, select “Off.” If you wish to output
tracks 1–4, select “1-4.” If you wish to output
tracks 5–8, select “5-8.”
44.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
45. “FX1 MstIns=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 1
into the master out, select “On.” If not, select
“Off.” If effect 1 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
46.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
47. “FX2 MstIns=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 2
into the master out, select “On.” If not, select
“Off.” If effect 2 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
48.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
49. “Change Routing ?” appears in the display. Press
[YES]. When the routing has been finalized,
“Complete” appears in the display, and you will
return to Play condition. If you decide to discard
the routing that was set, press [NO].
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Chapter 5 Storing Mixer Settings
80