Filter
Top Products
21. Press [PLAY] to begin playback of the song.
22. Adjust the volume balance with the faders for
Channels 1–4. The presently monitored sound
(volume levels, pan) will be recorded to Tracks 5
and 6 just as you hear it. You can raise the volume
as much as possible without causing distortion.
23. Press [STOP] to stop playback of the song.
Record and Check the Content
24. Press [ZERO] to return to the beginning of the
song.
25. While pressing [REC], press the STATUS button
for Track 5 (or 6).
The STATUS indicator blinks red.
26. Press [REC].
The REC indicator blinks red.
27. Press [PLAY].
The PLAY indicator lights green, and starts recording.
28. When recording is finished, press [STOP].
This stops the song.
29. Check the content of the recording. Press [ZERO]
to return to the beginning of the song.
30. Mute (sound is prevented from playing) Tracks
1–4. Press the STATUS buttons for Tracks 1–4.
The STATUS indicators go off.
31. Press [PLAY] to begin playback of the song.
Use the channel faders 5 and the master fader to adjust
the volume to a comfortable level.
Applying Reverb While Track Bouncing
Sometimes you may want to record previously-record-
ed tracks to another track while apply the effects to
them. Here is how to add reverb to Tracks 1–4 while
bouncing these tracks to Tracks 5 and 6. This can be
convenient when you want to add spatial effects such
as reverb and delay to each track while mixing down.
Select an Effect
1. Press [EFFECT] several times until “EFFECT-1
PRM?” appears in the display.
2. Press [YES].
The number and name of the currently selected effect
will be displayed, and you can select the desired
effect.
3. Use the TIME/VALUE dial to select the effect you
wish to use. Here, select “A00 RV:LargeHall.”
4. After selecting the effect, press [YES].
Specify the Track to Which the Effect is
to be Applied
5. Press [FADER (EDIT)] to light the TR (Track) indi-
cator.
6. Hold down [SHIFT] and press the channel 7
[EFFECT-1 (CH EDIT)].
“EFFECT1=” appears in the display.
7. Press the channel 1 [CH EDIT (SELECT)].
8. Rotate the TIME/VALUE dial.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Effect Number Effect Name
Chapter 3 Multi-Track Recording
61
Chapter 3