Roland VS-880EX Musical Instrument User Manual


 
Switching Scenes
You can switch Scenes with MIDI Program Change
messages sent by the external MIDI controller.
1. Press [SYSTEM] several times until “SYS MIDI
PRM ?” appears in the display.
2. Press [YES].
3. Press PARAMETER [ ] several times until
“SYS MID:P.C.Scne=” appears in the display.
4. Rotate the TIME/VALUE dial.
P.C.Scene (Program Change Scene)
With this set to “On,” the scene is changed when pro-
gram change messages are received. For now, select
“On.”
5. Press [PLAY (DISPLAY)].
Return to Play condition.
Use MIDI channel 15 for switching scenes. The rela-
tionship between the program change number
received by the VS-880EX and the Scene Number it
switches to is shown below.
Program Number Scene Number
1–8 1–8
* For more detailed information, please refer to “MIDI
Implementation” (Appendices p. 74).
Switching Effects
You can use MIDI control change messages transmit-
ted from an external MIDI controller to switch effects.
1. Press [SYSTEM] several times until “SYS MIDI
PRM ?” appears in the display.
2. Press [YES].
3. Press PARAMETER [ ] several times until
“SYS MID:P.C.Eff=” appears in the display.
4. Rotate the TIME/VALUE dial.
P.C.Eff (Program Change Effect)
With this set to “On,” the effect is switched when pro-
gram change messages are received. For now, select
“On.”
5. Press [PLAY (DISPLAY)].
Return to Play condition.
Use MIDI channel 1 to switch effect 1, and MIDI chan-
nel 2 to switch effect 2. The relationship between the
bank number received by the VS-880EX and the Effect
Patch Number it switches to is shown below.
Bank No.MSB Bank No.LSB Program No.
Patch No.
0 0 0–99 Preset A00–A99
0 1 0–99 Preset B00–B99
0 2 0–99 User U00–U99
0 3 0–99 Prset C00–C09
* For more detailed information, please refer to “MIDI
Implementation” (Appendices p. 74).
Adjusting Effects
You can use MIDI control change messages transmit-
ted from an external MIDI controller to control effects.
1. Press [SYSTEM] several times until “SYS MIDI
PRM ?” appears in the display.
2. Press [YES].
3. Press PARAMETER [ ] several times until
“SYS MID:C.C.Eff=” appears in the display.
4. Rotate the TIME/VALUE dial.
C.C.Eff (Control Change Effect)
With this set to “On,” the effect is adjusted when con-
trol change messages are received. For now, select
“On.”
5. Press [PLAY (DISPLAY)].
Return to Play condition.
* If you wish to use control change messages to switch
effects, use NRPN (Non Registered Parameter Numbers).
For more detailed information, please refer to “MIDI
Implementation” (Appendices p. 74).
During Playback of a Song
Scenes cannot be switched during playback of a
song. Because of this, the VS-880EX stops momen-
tarily if it receives a program change message
during playback instructing it to change scenes.
While it is stopped, the scene is switched, and
then playback resumes.
Furthermore, during recording, only effect pro-
gram change messages can be received. Scenes
cannot be switched during recording.
Chapter 9 Use with MIDI Devices
127
Chapter 9