Filter
Top Products
Protecting Performances
1. Make the current song the one to which you want
to apply Song Protect.
2. Press [SONG] several times until “SNG Song
Name/Prtct?” appears in the display.
3. Press [YES].
Song name appears in the display.
4. Press PARAMETER [ ].
“SNG ChangePrtct → On?” appears in the display.
5. Press [YES]. If you wish to cancel, press [NO].
6. “STORE Current?” appears in the display. If you
wish to save the current song and then protect it,
press [YES]. If you wish to protect the state in
which Song Store was last executed without sav-
ing the current song, press [NO].
7. The song will be protected.
“SNG Complete” appears in the display, and return to
Play condition.
To Remove Song Protect
1. Select the song from which you currently want to
remove the protect function.
2. Press [SONG] several times until “SNG Song
Name/Prtct?” appears in the display.
3. Press [YES].
Song name appears in the display.
4. Press PARAMETER [ ].
“SNG ChangePrtct → Off?” appears in the display.
5. Press [YES]. If you wish to cancel, press [NO].
6. Song protect will be disabled.
“SNG Complete” appears in the display, and return to
Play condition.
Selecting a Song (Song Select)
If the VS-1680 contains multiple songs, use the follow-
ing procedure to select a song.
1. Press [SYSTEM] several times until "Song Select ?"
appears in the display.
2. Press [YES].
3. Use the TIME/VALUE dial to appear the song
name that you wish to select. An asterisk "*" will
be displayed at the beginning of the current song.
4. Press [YES]. "Select Song, Sure?" (Are you sure
that you want to select this song?) will be dis-
played.
5. Press [YES] again.
6. "STORE Current?" (Store the current song?) will
be displayed. If you wish to save the current song,
press [YES]. If not, press [NO].
7. The song will be selected, and you will return to
the Play Condition.
Chapter 3 Multi-Track Recording
65
Chapter 3
Different types of songs (for the VS-880 and
VS-880EX) are distinguished.