Filter
Top Products
Storing Track Bouncing Settings
(Bouncing/Step Edit)
Select this when recording the performance data from
multiple tracks onto a number of other tracks.
1. Press [EZ ROUTING] several times until “EZR
Bouncing ?” appears in the display.
2. Press [YES].
“EZR Use Template” (do you wish to apply the tem-
plate?) appears in the display.
3. Press [NO].
4. “REC Track =” appears in the display. Specify the
track on which you will record. Press the STATUS
button for the track that you wish to record. The
STATUS indicator will blink red. Each time you
press the STATUS button, you will alternate
between recording and not recording. Use the
TIME/VALUE dial to select the V-track on which
you will record.
5.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
6. “TR* Link=” (“*” is the displayed track) appears
in the display. Specify the playback
tracks/recording tracks for which you will turn
Channel Link ON. Press the SELECT (CH EDIT)
button of the tracks for which you wish to turn
Channel Link ON, and rotate the TIME/VALUE
dial.
7.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
8. “TR* to =” appears in the display. Specify which
track will be recorded to which track. First press
the SELECT (CHEDIT) button for the playback
track, and then press the STATUS button for the
track that you wish to record.
You can also use the TIME/VALUE dial to select the
recording destination track. If you select “---,” that
track will not be played back (it will not be heard). If
you select “MIX,” the playback track will be assigned
to the mix bus (it will be heard but not recorded).
* Playback tracks that have Channel Link set to “On” can-
not be recorded to tracks on which Channel Link is set to
“Off” with the EZ Routing.
9.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
10. “TR* Pan =” appears in the display. Adjust the
pan of the playback track. Press the SELECT (CH
EDIT) button for the playback track whose pan
you wish to adjust, and use the TIME/VALUE
dial. You can also adjust the pan using the pan
knobs on the top panel.
* When Channel Link is on, adjust the Offset Balance of the
sources/tracks. (p. 151)
11.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Chapter 5 Storing Mixer Settings
81
Chapter 5