Roland VS-880EX Musical Instrument User Manual


 
Items Necessary for CD-R Backup
VS-880EX (1)
CD-RW drive (1)
Internal IDE hard disk (HDP88 series)
CD-RW (Compact Disc-ReWritable) disc
Saving Songs to CD-RW Discs
1. Select the disk (internal IDE hard disk) containing
the source song you want to back up as the cur-
rent drive.
2. Place a CD-RW disc in the CD-RW drive.
3. Press [SONG] several times until “CD-R Backup
?” appears in the display.
4. Press [YES].
“STORE Current?” (Store the current song?) appears
in the display.
5. If you wish to save the current song, press [YES];
if not, then press [NO]. If you have selected a
demo song, then press [NO].
“CDR Bak=” appears in the display.
6. Use the TIME/VALUE dial to select the song
(only one song or all songs on the current drive)
that you wish to save. To backup all songs from
the current drive, select “All.”
* It is impossible to save any additional song data to the
CD-RW discs or the CD-R discs that already have songs
backed up on them. When you back up onto the CD-RW
discs, existing contents should be totally erased before the
new contents are saved.
7. Press [YES].
8. If the song holds a large amount of data, and can-
not be contained on a single CD-RW disc, the disc
is ejected, and the message “Insert Disc #” (# indi-
cates the number in the order of insertion)
appears in the display to check the total amount
of necessary discs. Insert the next CD-RW disc
and press [YES]. At this time, we recommend that
you write the disc numbers on the labels so that
you can keep track of the order in which the discs
were inserted into the drive.
9. When copying over multiple CD-RW discs,
“Insert Disc #” (# indicates the number in the
order of insertion) appears in the display. Insert
each of the discs once more in the proper order
and press [YES].
10. When the CD-R backup procedure is finished,
return to Play condition.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Song Number
Song Name
Sample Rate Recording Mode
TIME
12
TIME
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
--- ---
Total number of songs in the current drive (3 songs)
If a CD-RW Disc which Contains Data is
Placed
7-1. If a CD-RW disc which contains data is
placed in the above step 2, “Finalized CD!”
or “Not Blank CD!” appears in the display.
7-2. Press [Enter] and “CD-RW Erase?” appears.
7-3. Press [YES]. “CD-RW Erasing...” appears in
the display and all the contents in the CD-
RW disc is erased. If you do not wish to
erase the data, press [NO], then place
another CD-RW disc and press [YES].
7-4. When erase is finished, “Continue?”
appears in the display. Press [YES]. If you
do not wish to save the song data but only
wish to erase the contents in the CD-RW
disc, press [NO].
Chapter 8 Use with a CD-RW Drive
114