Filter
Top Products
19. “IN* FX1 Ins=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 1,
select either “Ins,” “InsL,” “InsR,” or “InsS,” and
proceed to step 20. If you wish to use effect 1 in a
send/return configuration, select “Off” and pro-
ceed to step 23.
20. “IN* InsSnd =” appears in the display. Use the
TIME/VALUE dial to adjust the insert send level.
21.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
22. “IN* InsRtn =” appears in the display. Use the
TIME/VALUE dial to adjust the insert return
level.
23.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
24. “IN* FX1Snd=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to send the input
to the effect 1 bus, select either “Pre” or “Pst,” and
proceed to step 25. If you do not wish to send the
input to the effect 1 bus, select “Off,” and proceed
to step 31.
25.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
26. “IN* SndLev =” appears in the display. Use the
TIME/VALUE dial to adjust the send level. If in
step 19 you selected either “Ins,” “InsL,” “InsR,”
or “InsS,” the sound already processed by the
effect will be sent to the effect bus. (It will not be
re-input to effect 1.)
27.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
28. “IN* SndPan” appears in the display. Use the
TIME/VALUE dial to adjust the send pan.
29.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
30. “REC FX1 =” appears in the display. If you wish
to record the effect which you are using in a
send/return configuration, press the STATUS
button for the recording destination track.
However if in step 19 you selected either “Ins,”
“InsL,” “InsR,” or “InsS,” this display will not
appear. (The sound with the inserted effect will be
recorded.)
31.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
32. “Use EFFECT2 ?” appears in the display. If you
wish to use effect 2 press [YES], and make settings
for effect 2 as described in steps 17–30. If you do
not wish to use effect 2, press [NO] and proceed
to step 33.
33. “IN* AUX Snd” appears in the display. Rotate the
TIME/VALUE dial. If you wish to send the input
to the AUX bus, select either “Pre” or “Pst,” and
proceed to step 34. If you do not wish to send the
input to the AUX bus, select “Off,” and proceed to
step 31.
34.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
35. “IN* SndLev =” appears in the display. Use the
TIME/VALUE dial to adjust the send level.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Chapter 5 Storing Mixer Settings
79
Chapter 5