Mixer Section
1
2
3
4
5
6
7
8
9
10
11
Front and Rear Panels
14
1. PEAK Indicators
These indicators allow you to confirm the sound level
input at the input jacks (1–6). They help you to deter-
mine the correct input level when adjusting the
INPUT knobs. You will need to specify the level at
which the indicators light beforehand (p. 61). The indi-
cators are set at the factory to -6 dB.
2. INPUT Knobs
These knobs adjust the sensitivity of the input jacks
(1–6). Turn a knob fully to the right for mic level (-50
dBu), and fully to the left for line level (+4 dBu).
3. PAN Knobs
These knobs adjust the pan (location in the stereo out-
put) of each channel.
4. SELECT/CH EDIT (Select/Channel
Edit) buttons
Use these buttons when you wish to make settings for
a mixer channel. The names of the parameter groups
that can be set for each channel are printed below CH
EDIT. To directly specify a particular group, you can
hold down [SHIFT] and press the button for that
group name.
When editing a song, use these buttons to select tracks
for editing.