Filter
Top Products
Display (parameter name) Input Track
Mixer Mixer
Channel Link Off Off
EFFECT1 PstFade PstFade
EFFECT1 Send 100 100
EFFECT1 Pan 0 0
EFFECT2 PstFade PstFade
EFFECT2 Send 100 100
EFFECT2 Pan 0 0
Display (parameter name) Return Mixer
StereoIn Off
FX1 RTN Lev 100
FX1 RTN Bal 0
FX2 RTN Lev 100
FX2 RTN Bal 0
Display (parameter name) Master Block
Master Sel MIX
EQ Mode 2band
Direct Out Off
Master FX1 Ins Off
Master FX2 Ins Off
Display (parameter name) Effect
FX1 Sel A00:LargeHall
FX2 Sel A22:Short Dly
Storing Recording Settings
(Recording/Step Edit)
Select this when you want to record the performance
input via the INPUT jacks.
1. Press [EZ ROUTING] several times until “EZR
Recording ?” appears in the display.
2. Press [YES].
“EZR Use Template” (do you wish to apply the tem-
plate?) appears in the display.
3. Press [NO].
4. “REC Track =” appears in the display. Specify the
track on which you will record. Press the STATUS
button of the track that you wish to record. The
STATUS indicator will blink red. Each time you
press the STATUS button, you will cycle between
recording and not recording. You can rotate the
TIME/VALUE dial to select the V-track that you
wish to record.
5.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
6. “TR* Link=” (“*” is the displayed track) appears
in the display. Specify the tracks for which you
will turn Channel Link ON. Press the STATUS
button of the tracks for which you wish to turn
Channel Link ON, and rotate the TIME/VALUE
dial.
7. Press PARAMETER [ ]. You can return to
the previous screen by pressing PARAMETER
[].
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Display of tracks for recording
Current track selected for setting
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Chapter 5 Storing Mixer Settings
77
Chapter 5