Filter
Top Products
Loading Songs From CD-RW Discs
1. Select the disk (internal IDE hard disk) containing
the song you want to load as the current drive.
2. Place the CD-R disc to which the song data has
been backed up in the CD-RW drive.
3. Press [SONG] several times until “CD-R Recover
?” appears in the display.
4. Press [YES].
“STORE Current?” (Store the current song?) appears
in the display.
5. If you wish to save the current song, press [YES];
if not, then press [NO]. If you have selected a
demo song, then press [NO].
“CDR Rcv=” appears in the display.
6. Use the TIME/VALUE dial to select the song
(only one song or all songs on the CD-RW disc)
that you wish to load. To recover all songs from
the current drive, select “All.”
7. Press [YES].
8. If you selected “All” in step 6, the display will
indicate “INIT ***:* OK ?” (OK to initialize the
disk drive?). “***:*” is the ID number and parti-
tion number of the recover destination disk drive.
For example when recovering to partition 0 of the
internal hard disk drive, the display would indi-
cate “IDE:0.”
9. If you wish to initialize the current drive and then
recover, press [YES]. If at this point you press
[YES], all songs saved on the internal hard disk
will be lost. If you decide not to initialize, press
[NO]. Normally you should press [NO].
10. Execute the load. When over multiple discs, the
disc is ejected, “Insert Disc #” (# indicates the
number in the order of insertion) appears in the
display. Insert the next disc and press [YES].
11. When the CD-R recover procedure is finished,
return to Play condition.
How to Erase the Data in the CD-RW
Disc
It is impossible to write audio data to the CD-R discs
in which the song data is saved. To write audio data to
the finalized CD-RW discs, erase the existing data as
follows.
1. Place the CD-RW disc which includes the data
you wish to erase in the CD-RW drive.
2. Press [SONG] several times until “CD-R Backup?”
appears in the display.
3. Press [YES] and “STORE Current?” appears.
4. Press [YES] to save the current song, or [NO] if
not. If the current song is the demo song, press
[NO]. “CDR Bak=” appears in the display.
5. Press [YES] and “Finalized CD!” or “Not Blank
CD!” appears.
6. Press [ENTER (Yes)] and “CD-RW Erase?”
appears.
7. Press [YES] and “CD-RW Erasing...” appears and
the contents in the CD-RW disc is erased.
8. “Continue?” appears and press [NO].
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Song Number
Song Name
Sample Rate Recording Mode
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Total number of songs backed up to CD-R (3 songs)
Chapter 8 Use with a CD-RW Drive
115
Chapter 8