Filter
Top Products
14. Now reverb will be applied. The signal flow will be as follows.
15. Press [PLAY (DISPLAY)].
Return to Play condition. Playback the song and verify that the effect is being
applied.
Applying Effects While Recording (Send/Return)
Now we will see how to add affects to the source at the INPUT 1 jack, and then
record the direct sound and the sound with effects to Track 1. This is convenient
when you want to record vocals with reverb.
Select an Effect
1. Press [EFFECT] several times until “EFFECT-1 PRM?” appears in the dis-
play.
2. Press [YES].
The number and name of the currently selected effect will be displayed, and you
can select the desired effect.
3. Use the TIME/VALUE dial to select the effect you wish to use. Here, select
“A00 RV:LargeHall.”
4. After selecting the effect, press [YES].
Level
(Fader)
EQ
(2band, 3band)
FX1
Sw
Send
Level
Pan
Pan
Level
(Fader)
FX1
Balance
Return
Sw
+
+
MASTER OUT (L, R)
MIX bus
FX1 bus
Track
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Effect Number Effect Name
Chapter 3 Multi-Track Recording
51
Chapter 3