Filter
Top Products
Loading Performance Data
from a DAT Recorder
(Recover)
Use the following procedure to load song data that
was backed up on a DAT recorder. If two or more
songs were saved together during the backup, the data
of all songs will be loaded.
* You can recover VS-880 song data backed up using DAT
backup. For more detailed information, please see
“Compatibility” (p. 136).
1. Connect the DAT recorder to the VS-880EX as fol-
lowing.
2. Insert the tape which contains the song data into
the DAT recorder. If the song data is backed up
on two or more tapes, insert the first tape.
3. Prepare the tape for playback from the beginning
of the song data.
4. Press [SONG] several times until “SNG DAT
Recover?” appears in the display.
5. Press [YES].
“STORE Current?” (Store the current song?) appears
in the display.
6. If you wish to save the current song, press [YES];
if not, then press [NO]. If you have selected a
demo song, then press [NO].
7. “D.IN Sel =” appears in the display. Rotate the
TIME/VALUE dial.
D.IN Sel (Digital In Select)
Select either “DIGIN1” (coaxial) or “DIGIN2” (optical)
if you are going to recover data using the VS-880EX’s
DIGITAL IN connector.
8. Press PARAMETER [ ].
“Recover Ready?” appears in the display.
9. Press [YES].
DAT Recorder
Optical
Digtal Out
DAT Recorder
Coaxial
Digital Out
Chapter 10 Use with a DAT Recorder (DAT Backup)
131
Chapter 10