Filter
Top Products
PeakHoldSw (Peak Hold Switch)
With this set to “On,” the level meter in the graphic
display holds the display of peak levels.
5. Press [PLAY (DISPLAY)].
Return to Play condition. Now, the peak display is
reset (cleared) each time [PLAY (DISPLAY)] is
pressed.
Checking the Remaining Disk Space
The amount of free disk space available for recording
the current song is displayed as “REMAINING TIME”
field in the display. You can select the type of display
for this.
1. Press [SYSTEM] several times until “SYS System
PRM ?” appears in the display.
2. Press [YES].
3. Press PARAMETER [ ] several times until
“SYS RemainDsp=” appears in the display.
4. Rotate the TIME/VALUE dial.
RemainDsp (Remaining Display)
This selects how the remaining disk space is shown.
Time: This indicates the time (minutes/seconds)
left for recording.
CapaMB: This shows the actual memory (in
megabytes).
Capa %: This indicates the remaining space as a per-
centage of the total disk space.
Event: This shows the number of events used in
the recording.
5. Press [PLAY (DISPLAY)].
Return to Play condition.
When Using the Foot Switch
With an optional foot switch (such as the Roland DP-2
or BOSS FU-5U) connected to the FOOT SWITCH jack,
you can choose how the foot switch functions.
1. Press [SYSTEM] several times until “SYS System
PRM ?” appears in the display.
2. Press [YES].
3. Press PARAMETER [ ] several times until
“SYS Foot Sw=” appears in the display.
4. Rotate the TIME/VALUE dial.
Foot Sw (Foot Switch)
This sets the foot switch function.
Play/Stop: Pressing the switch alternately starts and
stops playback of the song.
Record: Works the same as the [REC] button. Use
this to switch between recording and
playback during manual Punch-In
Recording.
TapMarker: Works the same as the [TAP] button.
Mark points are set when the pedal is
pressed.
Next: Works the same as the [NEXT] button.
Each time the pedal is pressed recalls the
next marker.
Previous: Works the same as the [PREVIOUS] but-
ton. Each time the pedal is pressed recalls
the previous marker.
GPI: This controls start and stopping of play-
back of the song according to the GPI
trigger signal received from the FOOT
SWITCH jack.
GPI (Appendices p. 123)
5. Press [PLAY (DISPLAY)].
Return to Play condition.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Remaining amount (in the example, 294 minutes 40 seconds)
Chapter 13 Making Global Settings and Checking Conditions
165
Chapter 13