Filter
Top Products
128
Adding Effects
MFX Source
PRF, P1–P16 Multi-effects parameter settings used by the performance
PRF:
Performance settings
P1–P16:
Settings of the patch/rhythm set assigned to one of the parts (Select the part number.)
MFX Type 0–78 Selects from among the 78 available multi-effects.
For details on multi-effects parameters, refer to
Multi-Effects Parameters
(p. 131).
MFX Structure 1–16 Specifies how MFX1–3 will be connected.
MFX Output
Level
0–127 Volume of the sound passed through the multi-effects
MFX Chorus
Send Level
0–127 Amount of chorus for the sound passed through multi-effects
MFX Reverb
Send Level
0–127 Amount of reverb for the sound passed through multi-effects
Chorus Source PRF, P1–P16 Chorus parameter settings used by the performance
PRF:
Performance settings
P1–P16:
Settings of the patch/rhythm set assigned to one of the parts (Select the part number.)
Chorus Type 0–3 Selects either chorus or delay.
0 (OFF):
Neither chorus or delay is used.
1 (CHORUS):
Chorus is used.
2 (DELAY):
Delay is used.
3 (GM2 CHO):
General MIDI 2 chorus
Reverb Source PRF, P1–P16 Reverb parameter settings used by the performance
PRF:
Performance settings
P1–P16:
Settings of the patch/rhythm set assigned to one of the parts (Select the part number.)
Reverb Type 0–5 Type of reverb
0 (OFF):
Reverb is not used.
1 (REVERB):
Normal reverb
2 (SRV ROOM):
Simulates typical room acoustic reflections.
3 (SRV HALL):
Simulates typical concert hall acoustic reflections.
4 (SRV PLATE):
Simulates a plate reverb, a popular type of artificial reverb unit that derives its sound from
the vibration of a metallic plate.
5 (GM2 REV):
General MIDI 2 reverb
MFX Output As-
sign
A, B Output destination of the sound passed through the multi-effects
A:
OUTPUT A (MIX) jacks in stereo
B:
OUTPUT B jacks in stereo
* If the Mix/Parallel parameter is set to “MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 158).
* For some settings of MFX Structure, the sound that passes through the multi-effect will be sent to a different multi-effect,
and the MFX Output Assign setting will be ignored.
Chorus Output
Select
MAIN, REV,
M+R
Specifies how the sound routed through chorus will be output.
MAIN:
Output to the OUTPUT jacks in stereo.
REV:
Output to reverb in mono.
M+R:
Output to the OUTPUT jacks in stereo, and to reverb in mono.
Chorus Level 0–127 Volume of the sound passed through chorus
Chorus Output
Assign
A, B Selects the pair of OUTPUT jacks to which the chorus sound is routed when Chorus Output Select is set to
“MAIN” or “M+R.”
A:
OUTPUT A (MIX) jacks in stereo
B:
OUTPUT B jacks in stereo
* When Chorus Output Select is set to “REV,” this setting will have no effect.
* If the Mix/Parallel parameter is set to “MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 158).
Reverb Level
0–127 Volume of the sound passed through reverb
Reverb Output
Assign
A, B Specifies how the sound routed through reverb will be output.
A:
Output to the OUTPUT A (MIX) jacks in stereo.
B:
Output to the OUTPUT B jacks in stereo.
* If the Mix/Parallel parameter is set to “MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 158).
Mastering Effect
Type
0–5 Mastering effect settings (p. 156)
Parameter
Value Explanation
7
8
9
10
11
12
13
14
15
16
17
When Patch or Rhythm Set Settings Are Selected
When the patch or rhythm set’s effects settings are selected, those settings are shown in each of the performance’s effects setting screens, and
the settings can be then be changed as well. Changes to patch or rhythm set effects parameter settings are lost when another patch or rhythm
set is selected. To keep the modified settings, save the patch/rhythm set settings (p. 32, p. 51).
JUNO-G_e.book 128 ページ ２００６年２月１３日 月曜日 午後２時４４分