Filter
Top Products
60
Playing in Performance Mode
The currently selected part is called the “
current part
.”
1.
From the PERFORM PLAY screen, use
[] []
to select the part.
You can also select the part by pressing [PART SELECT] to
make it light and pressing PART SELECT [1]–[8].
* To select parts 9–16, press [9-16] to make it light, and then press
PART SELECT [9]–[16].
It’s easy to switch the patch assigned to a part.
1.
Select the part whose sound you want to switch.
2.
Press [F1 (PAT LIST)].
The PATCH LIST screen appears.
• If you press [F3 (FAVORIT)], the FAVORITE PATCH screen (p. 28)
appears.
• If you press [F4 (CATEG)], you can select patches by category (p. 27).
• If you press [F5 (PATCH)], the PATCH LIST screen (p. 27) appears.
• If you press [F6 (RHYTHM)], the RHYTHM LIST screen appears.
3.
Use [F1 (UP)] [F2 (DOWN)] to select a category or bank.
4.
Use the VALUE dial, [INC] [DEC], or
[] []
to select a patch.
5.
Press [ENTER] to select the patch.
In Performance mode you can play the sounds of all parts whose
Keyboard Switch is on, and all connected parts. Combining the parts
will produce, thicker, fatter sounds.
fig.Layer.e
1.
Press MODE [PERFORM] to access the PERFORM PLAY screen.
2.
Press [F2 (KBD SW)].
The Keyboard Switch window appears.
3.
Press [ ] [ ] to select the part you want to sound.
4.
Use the VALUE dial, [INC] [DEC], or
[] []
to select “ON.”
When you play the keyboard, you will hear the current part and
the parts whose keyboard switch is set to “ON.”
Press [PART SELECT] so it’s lit, then press PART SELECT [1]–
[8] to turn on/off the selected part.
* To turn parts 9–16 on/off, press [9-16] so it’s lit, then press PART
SELECT [9]–[16].
5.
Repeat steps
3
–
4
to turn the Keyboard Switch on for all
parts that are connected to the parts you want to play.
6.
Press [F6 (CLOSE)] to return to the PERFORM PLAY screen.
Using the PLAY Screen
Selecting a Part
Selecting the Sound for a Part
Combining and Playing
Sounds Together (Layer)
16(Tx ch.16)
15 (Tx ch.15)
2 (Tx ch.2)
1 (Tx ch.1)
Part 1
(Rx ch.1)
Part 2
(Rx ch.2)
Part 16
(Rx ch.16)
Part 15
(Rx ch.15)
Rx ch.: Receive Channel
Tx ch.: Transmit Channel
Keyboard Switch:
On
About the keyboard switch
Use the keyboard switch when you want to play multiple
sounds layered together (Layer) or assign different sounds to
different regions of the keyboard (Split). Conversely, you can
turn off all keyboard switches when you are creating data, etc.
JUNO-G_e.book 60 ページ ２００６年２月１３日 月曜日 午後２時４４分