Filter
Top Products
82
Playing Rhythms
1.
Create a rhythm pattern.
2.
Press [F6 (WRITE)].
The RHYTHM PATTERN NAME screen appears.
3.
Assign a name to the Rhythm Pattern.
For details on assigning names, refer to p. 24.
4.
When you have finished inputting the name, press [F6 (WRITE)].
A screen will appear, allowing you to select the write-
destination pattern.
5.
Use the VALUE dial, [INC] [DEC], or [ ] [ ] to select the
write destination.
6.
Press [F6 (WRITE)].
A message will ask you for confirmation.
7.
To save the Rhythm Pattern, press [F6 (EXEC)].
* To cancel, press [F5 (CANCEL)].
Never switch off the JUNO-G while data is being saved.
Not only can you use the prepared internal Rhythm Groups that
determine how rhythm are played, but you can also create them as well.
This way, you can enjoy performing your own original rhythm group.
1.
Press [RHYTHM PATTERN].
The RHYTHM GROUP screen appears.
2.
Use the VALUE dial or [INC] [DEC] to select a rhythm group
you want to edit.
3.
Hold down [SHIFT] and press [F5 (GRP EDIT)].
The RHY GRP EDIT screen appears.
4.
Press [ ] [ ] to select the parameter.
5.
Use the VALUE dial or [INC] [DEC] to set the value.
6.
When you have finished, press [F5 (EXIT)].
The Rhythm Groups you create are temporary; they are deleted as
soon as you turn off the power or select some other Group. You can
store 32 Rhythm Groups in the User memory.
1.
Create a rhythm group.
2.
Press [F6 (WRITE)].
The RHYTHM GROUP NAME screen appears.
3.
Assign a name to the Rhythm Group.
For details on assigning names, refer to p. 24.
4.
When you have finished inputting the name, press [F6 (WRITE)].
A screen will appear, allowing you to select the write-
destination group.
5.
Use the VALUE dial, [INC] [DEC], or [ ] [ ] to select the
write destination.
6.
Press [F6 (WRITE)].
A message will ask you for confirmation.
7.
To save the Rhythm Group, press [F6 (EXEC)].
* To cancel, press [F5 (CANCEL)].
Never switch off the JUNO-G while data is being saved.
Creating a Rhythm Group
(Rhythm Group Edit)
Parameter
Value Explanation
Current
Pad Num-
ber
1–6 Select the function button for which you want
to make settings.
You can also choose the button that you
want to set by pressing that button.
Ptn U001–256,
P001–256
Specifies the pattern number that will sound
when you press the function button.
Rhy
USER:
001–032
PRST:
001–036
GM:
001–009
CARD:
001–032
EXP:
001–
Specifies which rhythm set will be used.
Saving the Rhythm Group
You Have Created (Write)
Parameter
Value Explanation
Rhythm group settings are saved as independent data, not
as part of the data for each patch. The settings in Patch mode,
it is not possible to save rhythm group settings.
It can be saved to individual in Performance mode. If you
want to save your settings, press [WRITE] and save the
performance.
JUNO-G_e.book 82 ページ ２００６年２月１３日 月曜日 午後２時４４分