Filter
Top Products
62
Playing in Performance Mode
In the PART MIXER screen you can set the following parameters for
each part.
1.
Press MODE [PART MIXER] to access the PART MIXER screen.
2.
Press [F1 (LVL&PAN)]–[F4 (KEY/OUT)] to select the function.
3.
Use [ ] [ ] [ ] [ ] to select the parameter and part that
you want to edit.
4.
Use the VALUE dial or [INC] [DEC] to change the setting.
When playing along with a song, you can turn off (i.e., mute) parts
you don’t want to hear. This allows you to turn off the melody part
for karaoke applications or for practicing the muted part.
1.
Press MODE [PART MIXER] to access the PART MIXER screen.
2.
Press [F6 (MUTE)].
The Part Mute window appears.
3.
Press [ ] [ ] to select the part you want to mute.
4.
Use the VALUE dial, [INC] [DEC], or [ ] [ ] to select “ON.”
Parts whose mute setting is “ON” will not be heard.
Press [PART SELECT] so it’s lit, then press PART SELECT [1]–
[8] to turn on/off the selected part.
* To turn parts 9–16 on/off, press [9-16] so it’s lit, then press PART
SELECT [9]–[16].
5.
Press [F6 (CLOSE)] to return to the previous screen.
This setting can be saved as a performance setting.
* Part Mute does not turn off the MIDI receive switch; rather, it sets the
volume to the minimum setting to silence the sound. Therefore, MIDI
messages are still received.
Editing the Part Settings
Parameter
(Function Button)
Explanation
[F1 (LVL&PAN)]
The part’s volume (Level, p. 64) and panning
(left/right position) (Pan, p. 64)
[F2 (CHO&REV)] The amount of signal sent from each part to
chorus (Chorus, p. 65) and to reverb (Reverb,
p. 65)
[F3 (FILTER)]
The part’s CUTOFF and RESONANCE values
[F4 (KEY/OUT)] KEY The part’s pitch (semitone units, +/-4
octaves) (Coarse, p. 65)
KBD Keyboard Switch (p. 60)
RHY Rhythm Part
ARP Arpeggio Part (p. 74)
OUT Output Assign (Asgn, p. 65)
Silencing the Playback of a Specific
Part (Mute)
JUNO-G_e.book 62 ページ ２００６年２月１３日 月曜日 午後２時４４分