Filter
Top Products
54
Creating a Rhythm Set
WAVE PITCH ENV
WAVE MIX LV/PN
WAVE MIX TUNE
VELOCITY RANGE
You can use the force with which keys are played to control the way each waveform is played.
fig.TMT-V.e
Parameter
Value Explanation
P-Env Depth
-12– +12 Depth of the Pitch Envelope
Higher settings will cause the pitch envelope to produce greater change. Negative (-) settings will invert the shape of the
envelope.
P-Env V-Sens -63– +63 Keyboard playing dynamics can be used to control the depth of the pitch envelope.
If you want the pitch envelope to have more effect for strongly played notes, set this parameter to a positive (+) value.
P-Env T1 V-Sens -63– +63 This allows keyboard dynamics to affect the T1 of the Pitch envelope.
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive (+) value.
P-Env T4 V-Sens -63– +63 Use this parameter when you want key release speed to affect the T4 value of the Pitch envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value.
P-Env Time 1–4 0–127 Pitch envelope times (T1–T4)
Higher settings will result in a longer time until the next pitch is reached.
P-Env Level 0–4 -63– +63 Pitch envelope levels (L0–L4)
Specify how the pitch will change at each point, relative to the pitch set with Coarse Tune or Fine Tune.
WAVE MIX Parameters
Parameter
Value Description
Wave Level
0–127 Volume of the waveform
Wave Pan L64–0–63R Left/right position of the waveform
Wave Rnd Pan Sw OFF, ON Use this setting to cause the waveform’s panning to change randomly each time a key is pressed (ON) or not (OFF).
* The range of the panning change is set by the Random Pan Depth parameter (p. 56).
Wave Alter Pan Sw
OFF, ON, REVS This setting causes panning of the waveform to be alternated between left and right each time a key is pressed.
Set this to “ON” to pan the wave according to the Alternate Pan Depth parameter (p. 56) settings, or to “REVS”
when you want the panning reversed.
Parameter
Value Explanation
Wave Coarse Tune
-48– +48 Pitch of the waveform’s sound (in semitones, +/-4 octaves)
Wave Fine Tune -50– +50 Pitch of the waveform’s sound (in 1-cent steps; one cent is 1/100th of a semitone)
Parameter
Value Explanation
Velocity Control
OFF, ON, RAN Determines whether a different waveform is played (ON) or not (OFF) depending on the force with which the key
is played (velocity).
RAN:
The rhythm tone’s constituent waveforms will sound randomly, regardless of any Velocity messages.
Velo Fade Lower 0–127 Determines what will happen to the waveform’s level when the rhythm tone is played at a velocity lower than Velo
Range Lower.
If you don’t want the waveform to sound at all, set this parameter to “0.”
Velo Range Lower 1–UPPER Specifies the lowest velocity at which the waveform will sound.
Velo Range Upper LOWER–127 Specifies the highest velocity at which the waveform will sound.
T1 T2 T3 T4
L3
L4
L2
L1
L0
Note off
Pitch
Pitch Envelope
Time
Note on
Velo Range Lower
Velo Range Upper
Velo Fade Lower
Velo Fade Upper
Level
The waveform sounded
when you play softly
The waveform sounded
when you play strongly
Velocity
JUNO-G_e.book 54 ページ ２００６年２月１３日 月曜日 午後２時４４分