Filter
Top Products
56
Creating a Rhythm Set
TVA PARAMETER
TVA ENVELOPE
F-Env V-Curve
FIX, 1–7 Curve that determines how keyboard playing dynamics (velocity) will affect the TVF envelope
Set this to “FIX” if you don’t want the TVF Envelope to be affected by the keyboard velocity.
F-Env V-Sens -63– +63 Specifies how keyboard playing dynamics will affect the depth of the TVF envelope.
Positive (+) settings will cause the TVF envelope to have a greater effect for strongly played notes, and negative (-) set-
tings will cause the effect to be less.
F-Env T1 V-Sens -63– +63 This allows keyboard dynamics to affect the T1 of the TVF envelope.
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive (+) value.
F-Env T4 V-Sens -63– +63 Use this parameter when you want key release speed to affect the T4 value of the TVF envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value.
F-Env Time 1–4 0–127 TVF envelope times (T1–T4)
Higher settings will lengthen the time until the next cutoff frequency level is reached.
F-Env Level 0–4 0–127 TVF envelope levels (L0–L4)
Specify how the cutoff frequency will change at each point, relative to the Cutoff Frequency value.
Adjusting the Volume (TVA/TVA Envelope)
Parameter
Value Explanation
Tone Level
0–127 Volume of the tone
This setting is useful primarily for adjusting the volume balance between tones.
Level V-Curve FIX, 1–7 Curve that determines how keyboard playing dynamics (velocity) will affect the volume
Set this to “FIX” if you don’t want the volume of the tone to be affected by the keyboard velocity.
Level V-Sens -63– +63 Set this when you want the volume of the tone to change depending on keyboard playing dynamics.
Set this to a positive (+) value to have the changes in tone volume increase the more forcefully the keys are played; to
make the tone play more softly as you play harder, set this to a negative (-) value.
Tone Pan L64–0–63R Left/right position of the tone
Random Pan Depth 0–63 Use this parameter when you want the stereo location to change randomly each time you press a key.
Higher settings will produce a greater amount of change.
Alternate Pan Depth L63–0–63R This setting causes panning to be alternated between left and right each time a key is pressed.
Higher settings will produce a greater amount of change. “L” or “R” settings will reverse the order in which the pan
will alternate between left and right. For example if two rhythm tones are set to “L” and “R” respectively, the panning
of the two rhythm tones will alternate each time they are played.
Parameter
Value Explanation
A-Env T1 V-Sens
-63– +63 This allows keyboard dynamics to affect the T1 of the TVA envelope.
If you want Time 1 to be speeded up for strongly played notes, set this parameter to a positive (+) value. If you
want it to be slowed down, set this to a negative (-) value.
A-Env T4 V-Sens -63– +63 Use this parameter when you want key release speed to affect the T4 value of the TVA envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value. If you
want it to be slowed down, set this to a negative (-) value.
A-Env Time 1–4 0–127 TVA envelope times (T1–T4)
Higher settings will lengthen the time until the next volume level is reached.
A-Env Level 1–3 0–127 TVA envelope levels (L1–L3)
Specify how the volume will change at each point, relative to the Tone Level value.
Parameter
Value Explanation
1234567
T1 T2 T3 T4
L3
L1
L0
L2 L4
Note off
Cutoff
Frequency
TVF Envelope
Time
Note on
1234567
JUNO-G_e.book 56 ページ ２００６年２月１３日 月曜日 午後２時４４分