Filter
Top Products
134
Playing the JUNO-Gi from an External
MIDI Device
Connection example
MIDI OUT connector
MIDI IN connector
MIDI keyboard
JUNO-Gi
MIDI keyboard
Setting the Receive Channel
You’ll need to match your external MIDI device’s transmit channel with
the JUNO-Gi’s receive channel.
1. Press the [MENU] button.
2. Use the VALUE dial or the cursor button to select “4. System”
and press the [ENTER] button.
3. Press the [3] (MIDI/SYNC) button.
4. Press the [1] (GENERL) button.
5. Use the [
] [ ] buttons to select “Main Channel.”
6. Use the VALUE dial or the [DEC] [INC] buttons to set the
value.
Value 1–16
MEMO
If the [SPLIT] button is on, the Lower layer’s MIDI receive channel
can be speci ed by its own “Sub Channel” (p. 82) setting that is
independent of the Main Channel.
Setting the Program Change Receive Switch
Here’s how to turn on the receive switch for program change and bank
select messages. With the factory settings, both are turned “ON.”
1. Press the [MENU] button.
2. Use the VALUE dial or the cursor button to select “4. System”
and press the [ENTER] button.
3. Press the [3] (MIDI/SYNC) button.
4. Press the [3] (RX) button.
5. Use the cursor buttons to select “Receive Program Change”
or “Receive Bank Select.”
6. Use the VALUE dial or the [DEC] [INC] buttons to turn each of
these “ON.”
7. To save your settings, press the [WRITE] button.
If you decide not to save the changes you made, press the [EXIT]
button to return to the previous screen.
MEMO
• For details on these settings, refer to “[3] (RX)” (p. 82).
• For details on how to set the transmit channel of your external MIDI
device, refer to its owner’s manual.
Synchronizing with an External MIDI
Device
Connection example
MIDI OUT connector
MIDI OUT connector
MIDI IN connector
MIDI IN connector
MIDI device
JUNO-Gi
Here’s how to synchronize the JUNO-Gi’s USB Memory Song Player
with an external MIDI device.
* The JUNO-Gi’s Digital Recorder cannot synchronize with an external
MIDI device.
* If the Tempo Link (p. 83) is on, the JUNO-Gi cannot synchronize to an
external MIDI device.
1. Press the [MENU] button.
2. Use the VALUE dial or the cursor button to select “4. System”
and press the [ENTER] button.
3. Press the [3] (MIDI/SYNC) button.
4. Press the [4] (SYNC) button.
5. Use the cursor buttons to select the parameter you want to
edit.
6. Use the VALUE dial or the [DEC] [INC] buttons to edit the
value.
For details on these settings, refer to “[4] (SYNC)” (p. 83).
7. To save the settings, press the [WRITE] button.
Transmitting Synchronization Data
If you want an external MIDI device to synchronize to the operation of
the JUNO-Gi’s USB Memory Song Player, make the following settings.
Parameter Value
USB Song Sync Mode MASTER
MIDI Clock Output ON
Behavior upon reception of GM System On or GS Reset
When the JUNO-Gi receives a GM System On or GS Reset message
via MIDI, it will switch to “MIDI controller mode” (p. 133). At this time,
the volume will be set to the value speci ed by “SMF Level” (p. 83).
When the JUNO-Gi receives a GM System O message, it will exit
MIDI controller mode.