Filter
Top Products
64
44: LONG DELAY
A delay that provides a long delay time.
L in
R in
L out
R out
2-Band
EQ
Pan R
Pan L
2-Band
EQ
Feedback
Long Delay
Parameter Value Explanation
Delay Time 0–2600 msec, note
Delay time from when the
original sound is heard to when
the delay sound is heard
Phase NORMAL, INVERSE
Phase of the delay (NORMAL:
non-inverted, INVERT: inverted)
Feedback # -98–+98%
Proportion of the delay sound
that is to be returned to the
input (negative values invert the
phase)
HF Damp 200–8000 Hz, BYPASS
Frequency at which the high-
frequency content of the delayed
sound will be cut
(BYPASS: no cut)
Pan # L64–63R Panning of the delay sound
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance # D100:0W–D0:100W
Volume balance of the original
sound (D) and delay sound (W)
Level 0–127 Output Level
45: SERIAL DELAY
This delay connects two delay units in series. Feedback can be applied independently
to each delay unit, allowing you to produce complex delay sounds.
R in
R out
L in
L out
Feedback 1
Pan L
Pan R
Delay 1
Feedback 2
Delay 2
Parameter Value Explanation
Delay 1 Time 0–1300 msec, note
Delay time from when sound is
input to delay 1 until the delay
sound is heard
Delay 1 Feedback # -98–+98%
Proportion of the delay sound
that is to be returned to the input
of delay 1 (negative values invert
the phase)
Delay 1 HF Damp 200–8000 Hz, BYPASS
Frequency at which the
high-frequency content of the
delayed sound of delay 1 will be
cut (BYPASS: no cut)
Delay 2 Time 0–1300 msec, note
Proportion of the delay sound
that is to be returned to the input
of delay 2 (negative values invert
the phase)
Delay 2 Feedback # -98–+98%
Proportion of the delay sound
that is to be returned to the input
of delay 2 (negative values invert
the phase)
Delay 2 HF Damp 200–8000 Hz, BYPASS
Frequency at which the
high-frequency content of the
delayed sound of delay 2 will be
cut (BYPASS: no cut)
Parameter Value Explanation
Pan # L64–63R Panning of the delay sound
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance # D100:0W–D0:100W
Volume balance of the original
sound (D) and delay sound (W)
Level 0–127 Output Level
46: MODULATION DELAY
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
When Feedback Mode is CROSS:
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
Parameter Value Explanation
Delay Left
0–1300 msec, note
Adjusts the time until the delay
sound is heard.
Delay Right
Feedback Mode NORMAL, CROSS
Selects the way in which delay
sound is fed back into the eect
(See the gures above.)
Feedback # -98–+98%
Adjusts the amount of the delay
sound that’s fed back into the
eect. Negative (-) settings invert
the phase.
HF Damp 200–8000 Hz, BYPASS
Adjusts the frequency above
which sound fed back to the
eect is ltered out. If you don’t
want to lter out any high
frequencies, set this parameter
to BYPASS.
Rate # 0.05–10.00 Hz, note Frequency of modulation
Depth 0–127 Depth of modulation
Phase 0–180 deg Spatial spread of the sound
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance # D100:0W–D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
Level 0–127 Output Level