Filter
Top Products
16
Turning the Power On
* Once the connections have been completed (p. 12), turn on power to
your various devices in the order speci ed. By turning on devices
in the wrong order, you risk causing malfunction and/or damage to
speakers and other devices.
1. Minimize the volume of the JUNO-Gi and your speakers.
2. On the JUNO-Gi’s rear panel, turn the [POWER] switch ON.
* Always make sure to have the volume level turned down before
switching on power. Even with the volume all the way down, you
may still hear some sound when the power is switched on, but this is
normal, and does not indicate a malfunction.
3. Turn on the power of your speakers.
4. Use the [VOLUME] knob to adjust the volume appropriately.
Turning the Power O
1. Minimize the volume of the JUNO-Gi and your speakers.
2. Turn o the power of your speakers.
3. Turn the JUNO-Gi’s [POWER] switch OFF.
If you don’t want the power to turn o automatically, turn o the “ Auto Power O ” setting
The JUNO-Gi will automatically turn o when no operation has been performed for a certain length of time. (With the factory settings, the power
will turn o after 240 minutes.)
NOTE
When the power turns o , any unsaved modi cations that you’ve made in the settings will be lost. If you want to keep the setting changes
you’ve made, make sure to save them beforehand.
If you want to leave the power on at all times, turn o the “Auto Power O ” setting as described below.
1. Press the [MENU] button.
2. Use the VALUE dial or the cursor buttons to select “4. System,” and then press the [ENTER] button.
3. Press the [1] (GENERAL) button.
4. Use the cursor buttons to select “Auto Power O .”
5. Use the VALUE dial to change the setting to the “OFF” setting.
6. Press the [6] (WRITE) button to save the setting.