Roland JUNO-Gi Electronic Keyboard User Manual


  Open as PDF
of 148
 
67
Overview
Appendix
USB Memory
Song Player
Digital Recorder
Synthesizer
Selecting Sounds Perform. Functions Editing/Eects Other Settings
Rec/Play/Edit Eects Rhythm Pattern
Parameter Value Explanation
HF Damp 200–8000 Hz, BYPASS
Adjusts the frequency above
which sound fed back to the
eect will be cut. If you do not
want to cut the high frequencies,
set this parameter to BYPASS.
Left Level
0–127 Output level of the delay soundRight Level
Center Level
Output Mode
The optimal 3D eect will be achieved.
SPEAKER When using speakers
PHONES When using headphones
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance # D100:0W–D0:100W
Volume balance between the
direct sound (D) and the eect
sound (W)
Level 0–127 Output Level
53: TIME CTRL DELAY
A stereo delay in which the delay time can be varied smoothly.
R in
R out
L in
L out
Feedback
Feedback
Pan L
Pan R
Time Ctrl Delay
Time Ctrl Delay
2-Band EQ
2-Band EQ
Parameter Value Explanation
Delay Time # 0–1300 msec, note
Adjusts the time until the delay
is heard.
Acceleration 0–15
Adjusts the speed which the
Delay Time changes from the
current setting to a specied new
setting. The rate of change for
the Delay Time directly aects
the rate of pitch change.
Feedback # -98–+98%
Adjusts the amount of the delay
that’s fed back into the eect.
Negative (-) settings invert the
phase.
HF Damp 200–8000 Hz, BYPASS
Adjusts the frequency above
which sound fed back to the
eect is ltered out. If you do
not want to lter out any high
frequencies, set this parameter
to BYPASS.
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance # D100:0W–D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
Level 0–127 Output Level
54: LONG TIME CTRL DELAY
A delay in which the delay time can be varied smoothly, and allowing an extended
delay to be produced.
L in
R in
L out
R out
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
2-Band
EQ
Feedback
Time Control Delay
Parameter Value Explanation
Delay Time # 0–2600 msec, note
Adjusts the time until the delay
is heard.
Acceleration 0–15
Adjusts the speed which the
Delay Time changes from the
current setting to a specied new
setting.
The rate of change for the Delay
Time directly aects the rate of
pitch change.
Feedback # -98–+98%
Adjusts the amount of the delay
that’s fed back into the eect.
Negative (-) settings invert the
phase.
HF Damp 200–8000 Hz, BYPASS
Adjusts the frequency above
which sound fed back to the
eect is ltered out. If you do
not want to lter out any high
frequencies, set this parameter
to BYPASS.
Pan # L64–63R Stereo location of the delay
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance # D100:0W–D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
Level 0–127 Output Level
 previous next