Roland JUNO-Gi Electronic Keyboard User Manual


  Open as PDF
of 148
 
60
32: 2 BAND CHORUS
A chorus eect that lets you apply an eect independently to the low-frequency and
high-frequency ranges.
R in
R out
L in
L out
Parameter Value Explanation
Split Freq 200–8000 Hz
Frequency at which the low and
high ranges will be divided
Low Pre Delay 0.0–100 msec
Delay time from when the
original sound is heard to when
the low-range chorus sound is
heard
Low Rate # 0.05–10.00 Hz, note
Rate at which the low-range
chorus sound is modulated
Low Depth 0–127
Modulation depth for the
low-range chorus sound
Low Phase 0–180 deg
Spaciousness of the low-range
chorus sound
High Pre Delay 0.0–100 msec
Delay time from when the
original sound is heard to when
the high-range chorus sound is
heard
High Rate # 0.05–10.00 Hz, note
Rate at which the low-range
chorus sound is modulated
High Depth 0–127
Modulation depth for the
high-range chorus sound
High Phase 0–180 deg
Spaciousness of the high-range
chorus sound
Balance # D100:0W–D0:100W
Volume balance of the original
sound (D) and chorus sound (W)
Level 0–127 Output Level
33: 2 BAND FLANGER
A anger that lets you apply an eect independently to the low-frequency and
high-frequency ranges.
R in
R out
L in
L out
Split
High Band Flanger
Low Band Flanger
High Band Flanger
Low Band Flanger
Split
Low Band Feedback
High Band Feedback
High Band Feedback
Low Band Feedback
Parameter Value Explanation
Split Freq 200–8000 Hz
Frequency at which the low and
high ranges will be divided
Low Pre Delay 0.0–100 msec
Delay time from when the
original sound is heard to when
the low-range anger sound is
heard
Parameter Value Explanation
Low Rate # 0.05–10.00 Hz, note
Rate at which the low-range
anger sound is modulated
Low Depth 0–127
Modulation depth for the
low-range anger sound
Low Phase 0–180 deg
Spaciousness of the low-range
anger sound
Low Feedback # -98–+98%
Proportion of the low-range
anger sound that is to be
returned to the input (negative
values invert the phase)
High Pre Delay 0.0–100 msec
Delay time from when the
original sound is heard to when
the high-range anger sound
is heard
High Rate # 0.05–10.00 Hz, note
Rate at which the high-range
anger sound is modulated
High Depth 0–127
Modulation depth for the
high-range anger sound
High Phase 0–180 deg
Spaciousness of the high-range
anger sound
High Feedback # -98–+98%
Proportion of the high-range
anger sound that is to be
returned to the input (negative
values invert the phase)
Balance # D100:0W–D0:100W
Volume balance of the original
sound (D) and anger sound (W)
Level 0–127 Output Level
34: 2 BAND STEP FLANGER
A step anger that lets you apply an eect independently to the low-frequency and
high-frequency ranges.
R in
R out
L in
L out
Split
High Band Step Flanger
Split
Low Band Feedback
High Band Feedback
High Band Feedback
Low Band Feedback
Low Band Step Flanger
High Band Step Flanger
Low Band Step Flanger
Parameter Value Explanation
Split Freq 200–8000 Hz
Frequency at which the low and
high ranges will be divided
Low Pre Delay 0.0–100 msec
Delay time from when the
original sound is heard to when
the low-range anger sound is
heard
Low Rate # 0.05–10.00 Hz, note
Rate at which the low-range
anger sound is modulated
Low Depth 0–127
Modulation depth for the
low-range anger sound
Low Phase 0–180 deg
Spaciousness of the low-range
anger sound
Low Feedback # -98–+98%
Proportion of the low-range
anger sound that is to be
returned to the input (negative
values invert the phase)
Low Step Rate # 0.10–20.00 Hz, note
Rate at which the steps will cycle
for the low-range anger sound
 previous next