Roland JUNO-Gi Electronic Keyboard User Manual


  Open as PDF
of 148
 
74
76: FLANGER g DELAY
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Flanger
Balance W
Balance W
Balance D
Balance D
Feedback
Parameter Value Explanation
Flanger Pre Delay 0.0–100 msec
Adjusts the delay time from
when the direct sound begins
until the anger sound is heard.
Flanger Rate # 0.05–10.00 Hz, note Frequency of modulation
Flanger Depth 0–127 Depth of modulation
Flanger Feedback # -98–+98%
Adjusts the proportion of the
anger sound that is fed back
into the eect. Negative (-)
settings will invert the phase.
Flanger Balance # D100:0W–D0:100W
Volume balance between the
direct sound (D) and the anger
sound (W)
Delay Time 0–2600 msec, note
Adjusts the delay time from
the direct sound until the delay
sound is heard.
Delay Feedback # -98–+98%
Adjusts the proportion of the
delay sound that is fed back into
the eect. Negative (-) settings
will invert the phase.
Delay HF Damp 200–8000 Hz, BYPASS
Adjusts the frequency above
which sound fed back to the
eect will be cut. If you do not
want to cut the high frequencies,
set this parameter to BYPASS.
Delay Balance # D100:0W–D0:100W
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Level 0–127 Output Level
77: CHORUS g FLANGER
Feedback
Flanger
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Chorus
Balance W
Balance W
Balance D
Balance D
Parameter Value Explanation
Chorus Pre Delay 0.0–100 msec
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Chorus Rate # 0.05–10.00 Hz, note
Modulation frequency of the
chorus eect
Chorus Depth 0–127
Modulation depth of the chorus
eect
Chorus Balance # D100:0W–D0:100W
Volume balance between the
direct sound (D) and the chorus
sound (W)
Flanger Pre Delay 0.0–100 msec
Adjusts the delay time from
when the direct sound begins
until the anger sound is heard.
Flanger Rate # 0.05–10.00 Hz, note
Modulation frequency of the
anger eect
Flanger Depth 0–127
Modulation depth of the anger
eect
Flanger Feedback # -98–+98%
Adjusts the proportion of the
anger sound that is fed back
into the eect. Negative (-)
settings will invert the phase.
Flanger Balance # D100:0W–D0:100W
Adjusts the volume balance
between the sound that is sent
through the anger (W) and the
sound that is not sent through
the anger (D).
Level 0–127 Output Level
 previous next