Filter
Top Products
107
Inserting an external effects device
Inserting an external effects device
Inserting an external effects device into a channel
To insert an external effects device into a channel, connect the
CONSOLE IN jack and CONSOLE OUT jack to your external effects
device, and insert the corresponding EXT FX into the desired
channel.
The EXT FX INSERT SELECT popup is used to insert an EXT FX into
a channel.
1.
In the EFFECTS section, press [EXT FX].
fig.ScrEXT.eps
The EXTERNAL INSERT screen will appear.
2.
Move the cursor to the EXT FX INSERT SELECT popup
button for the desired EXT FX, and press [ENTER].
fig.ScrEXTInsSelGuide.eps
The EXT FX INSERT SELECT popup will appear.
Current insert-destination indication
This indicates the current insert-destination.
Target EXT FX indication
This indicates the EXT FX to which the EXT FX INSERT SELECT
popup applies.
Insert-destination select buttons
These buttons select the channel into which the EXT FX will
be inserted.
The function buttons have the following operations:
Here we’ll explain how to connect your external effects device to
CONSOLE IN5 and CONSOLE OUT5, and insert it into CH1.
1.
Access the EXTERNAL INSERT screen.
2.
Move the cursor to the ENABLE button for EXT FX1, and
press [ENTER] to select it.
3.
Connect your external effects device to CONSOLE IN5
and CONSOLE OUT5.
fig.ExtFxConnect.eps
If you connect your external effects device while the EXT FX
ENABLE button is off, the input and output may loop.
If the EXT FX insert-destination is already specified when you
connect your external effects device, noise may be heard in
the channel.
4.
Move the cursor to the EXT FX INSERT SELECT popup
button for EXT FX1, and press [ENTER].
fig.ScrEXTInsSel.eps
The EXT FX INSERT SELECT popup will appear.
5.
Move the cursor to the CH1 insert-destination channel
select button, and press [ENTER] to select it.
6.
Press [F8 (CLOSE)] to close the popup.
Accessing the EXT FX INSERT SELECT
popup
[F1 (CH 1–32 INSERT)]
Displays CH1–32 as the insert-destination
channel select buttons.
21 3
1
2
3
[F2 (BUS INSERT)]
Displays AUX1–8, MTX1–4, and MAIN L/R/C as
the insert-destination channel select buttons.
[F6 (SELECT NONE)] Clears the insert-destination selection.
[F8 (CLOSE)] Closes the popup.
Inserting an EXT FX into a channel
External effects
device
CONSOLE OUT 1
CONSOLE OUT5
INPUT OUTPUT
CONSOLE IN 1
CONSOLE IN5
M-300_e.book 107 ページ ２０１０年６月２４日 木曜日 午後２時２６分