Roland M-300 DJ Equipment User Manual


 
39
Basic operation
Basic operation
You can assign a name of up to twelve characters to user data.
Use the NAME EDIT popup to edit the name.
1.
Access the desired LIBRARY popup.
fig.ScrChLib.eps
2.
From the library data list, select the desired library data.
You cannot edit library data in which “PRESET” or “LOCK” is
shown.
3.
Press [F3 (NAME EDIT)] to access the NAME EDIT popup.
4.
Use the NAME EDIT popup to edit the name.
For details on operations in the NAME EDIT popup, refer to
“Editing a name” (p. 37).
5.
Press [F8 (OK)] to finalize the edited name and close the
NAME EDIT popup.
Pressing [F7 (CANCEL)] will cancel the operation.
1.
Access the desired LIBRARY popup.
2.
From the library data list, select the desired library data.
You cannot clear library data in which “PRESET” or “LOCK” is
shown.
3.
Press [F6 (CLEAR)].
fig.ScrM48LibDel_Conf.eps
A message will ask you to confirm the operation.
4.
Press [F8 (CLEAR)]
The library data you selected in step 2 will be cleared.
Pressing [F7 (CANCEL)] will cancel the operation.
N
CONFIRMATION message
fig.Confirm.eps
This message asks you to confirm an operation.
CAUTION message
fig.Caution.eps
This message cautions you that a problem has occurred
during operation.
ERROR message
fig.Error.eps
This message will appear if a fatal error occurs.
Wait message
fig.Wait.eps
This message is shown while a time consuming process is
being executed. You cannot close this until the process is
completed.
Editing the name of library data
Clearing data of a library
Message operations
M-300_e.book 39 ページ 2010年6月24日 木曜日 午後2時26分