Filter
Top Products
98
Effects
Effects
fig.EffectDia.eps
The M-300 contains four internal effects (FX1–FX4), each of which allows you to select from 11 different effect types including reverb,
delay, and 31-band GEQ.
You can use effects by inserting them into a channel, or in a send/return configuration using an AUX channel in combination with an input
channel as the FX return.
The EFFECTS screen is used to perform effect operations.
About effects
INPUT OUTPUT
EFFECT
FX 1
FX
OUTPUT
SELECT
To CH 1 FX INSERT IN
To CH 32 FX INSERT IN
To AUX 1 FX INSERT IN
To AUX 8 FX INSERT IN
To MTX 1 FX INSERT IN
To MTX 4 FX INSERT IN
To MAIN L FX INSERT IN
To MAIN R FX INSERT IN
To MAIN C FX INSERT IN
To INPUT PATCHBAY
FX
INPUT
SELECT
CH 1 FX INSERT OUT
CH 32 FX INSERT OUT
AUX 1 FX INSERT OUT
AUX 8 FX INSERT OUT
MTX 1 FX INSERT OUT
MTX 4 FX INSERT OUT
AUX 1 OUT
AUX 8 OUT
MAIN L FX INSERT OUT
MAIN R FX INSERT OUT
MAIN C FX INSERT OUT
Same as the above
FX 2
Same as the above
FX 3
Same as the above
FX 4
fig.ScrFxRackGuide.eps
FX1–4
fig.ScrFxRackGuide2.eps
This area indicates the status of FX1–4. It is organized as follows:
Effect number indication
This indicates the effect number.
FX INSERT/SOURCE SELECT popup button
This selects the input-source for the effect. The current
input-source is shown on the button. When you move the
cursor to the button and press [ENTER], the FX INSERT/
SOURCE SELECT popup will appear. This can be set
separately for the L and R channels.
If you’ve selected insertion into a channel in the FX INSERT/
SOURCE SELECT popup, the channel insert will be used as both
the input and output of the effect. In this case, the
corresponding FX DESTINATION SELECT button will be
unavailable.
IN meters
These indicate the input level to the effect.
Effect name indication
The upper line shows the library name, and the lower line
shows the effect type name.
The icon indicates the input/output configuration for the
effect:
●
Mono-in/Stereo-out
fig.ScrFxTypeMS.eps
This is a monaural-input/stereo-output type effect. These
effects are used mainly in a send/return configuration.
If you specify two input-sources, the two inputs will be mixed to
mono before being input.
●
Stereo-in/Stereo-out
fig.ScrFxTypeSS.eps
This is a stereo-input/stereo-output type effect. These effects
can be inserted into a stereo channel, or used in a send/
return configuration with stereo-linked AUX channels.
EFFECTS screen
1
1
2
3
4
5
6 7 81
1
2
3
4
M-300_e.book 98 ページ ２０１０年６月２４日 木曜日 午後２時２６分