Filter
Top Products
121
Scene memory
Scene memory
1.
Access the SCENE LIST EDIT popup.
2.
From the scene list, select the scene whose contents you
want to erase.
3.
Press [F6 (CLEAR)].
A message will ask you to confirm the Clear operation.
Press [F8 (CLEAR)] to carry out the Clear operation. The
contents of the scene you selected in step 2 will be erased.
If you press [F7 (CANCEL)], the operation will be cancelled.
You can’t erase a scene that is locked.
Global Scope is a function that lets you limit the channels and
parameters that will be recalled; its settings apply to all scenes.
The GLOBAL SCOPE popup is used to make settings for the
Global Scope function.
fig.ScrRecallSafeGuide.eps
fig.ScrRecallSafeGuide2.eps
Parameter recall scope buttons
(CH1–32, AUX/MTX/MAIN tab)
These buttons specify the scope of the parameters that will
be recalled for the channels selected by the channel recall
scope buttons.
Select the parameters that you want to include in the scope
of recall, and de-select the parameters that you don’t want
to be recalled.
The parameter recall scope buttons correspond to the
following parameters:
• For CH1–32
• For AUX/MTX/MAIN
Channel recall scope buttons
These buttons specify the channels that will be included in
the recall scope.
Select the channels that you want to include in the scope of
recall, and de-select the channels that you don’t want to be
recalled.
DCA/MUTE group recall scope buttons
These buttons specify the DCA/MUTE groups that will be
included in the recall scope.
Select the DCA/MUTE groups that you want to include in the
scope of recall, and de-select the DCA/MUTE groups that you
don’t want to be recalled.
Erasing the contents of a scene
The Global Scope function
GLOBAL SCOPE popup
21
3
4
Item
Explanation
Preamp
Preamp gain, pad, and +48V phantom power
Phase Phase
ATT Attenuator
HPF High-pass filter
Gate Gate/Expander
Comp Compressor
EQ 4-band EQ
Fader Faders
Pan Pan
LCR LCR button, CENTER
Send AUX/MTX sends
Direct Direct out point
Mute Mute
To MAIN MAIN send
Item
Setting
ATT
Attenuator
EQ 8-band EQ
Fader Faders
Balance Balance
LCR LCR button, CENTER
Limiter Limiter
Delay Delay
MTX Send MTX sends
Mute Mute
To MAIN MAIN send
1
2
3
M-300_e.book 121 ページ ２０１０年６月２４日 木曜日 午後２時２６分