Filter
Top Products
135
User settings
User settings
Applicable user indication
This indicates the user settings to which the USER
PREFERENCE popup applies.
User fader assign 1–16
This area indicates the channels that are assigned to user
faders 1–16.
The function buttons have the following operations:
5.
Move the cursor to the desired user fader assignment,
and press [ENTER].
fig.ScrUserFdrAsgn.eps
The USER FADER ASSIGN popup will appear.
Current assignment
This indicates the channel that is currently assigned to the
user fader.
Applicable user fader
This indicates the user fader to which the USER FADER
ASSIGN setting applies.
Assignment channel select buttons
Here you can select the channel that will be assigned to the
user fader. The selected channel will be assigned to the user
fader.
The function buttons have the following operations:
6.
Use [F1 (CH 1–32)], [F2 (AUX/MTX/MAIN)] or [F3 (DCA)] to
access the tab that contains the desired channel.
7.
Move the cursor to the desired channel, and press
[ENTER] to select it.
8.
Press [F8 (CLOSE)] to finalize the changes and close the
USER FADER ASSIGN popup.
9.
Press [F8 (OK)] to finalize the changes and close the USER
PREFERENCE popup.
If you press [F7 (CANCEL)], the changes will be cancelled and
the USER PREFERENCE popup will close.
As an alternative to pressing [ENTER] in step 5, you can use the
value dial to edit the user fader assignment.
As an alternative to pressing [ENTER] in step 5, you can use the
[SEL] button to edit the user fader assignment.
[F1 (LAYER 1)]
Accesses the LAYER 1 tab.
[F2 (LAYER 2)] Accesses the LAYER 2 tab.
[F3 (BUTTON 1-8)] Accesses the BUTTON 1–8 tab.
[F4 (BUTTON 9–16)] Accesses the BUTTON 9–16 tab.
[F5 (OTHER)] Accesses the OTHER tab.
[F7 (CANCEL)] Cancels the changes and closes the popup.
[F8 (OK)] Confirms the changes and closes the popup.
[F1 (CH 1–32)] Displays CH1–32 as the assignment channel
select buttons.
[F2 (AUX/MTX/MAIN)] Displays AUX1–8, MTX1–4, and MAIN C as the
assignment channel select buttons.
[F3 (DCA)] Displays DCA1–4 as the assignment channel
select buttons.
[F8 (CLOSE)] Confirms the changes and closes the popup.
1
2
2
1
3
1
2
3
M-300_e.book 135 ページ ２０１０年６月２４日 木曜日 午後２時２６分