Filter
Top Products
153
Other settings and functions
Other settings and functions
2.
View the system information in the INFORMATION area.
If the Battery indication shows OK, the internal lithium
battery voltage is satisfactory.
If this shows LOW or NG, the voltage is low. Replace the
internal lithium battery as described in “About the internal
lithium battery” (p. 18).
3.
Use the SAMPLING FREQ select buttons to select either
44.1 kHz or 48 kHz as the sampling frequency at which
the M-300 will operate.
fig.ScrSetFreqConf.eps
A message will ask you to confirm the operation.
Press [F8 (SET)] to switch to the sampling frequency you
selected in step 3.
If you press [F7 (CANCEL)], the change will be cancelled.
The sampling frequency setting also determines the sampling
frequency of the M-300’s DIGITAL OUT connector and the
sampling frequency for recording and playback on the USB
memory recorder.
4.
Use the DELAY UNIT select buttons to select the delay
units shown in the CHANNEL DISPLAY screens (AUX/
MTX/MAIN) and the MONITOR screen.
If you select “Frame” as the delay units, move cursor to the
“fps” field, and use dial to select the frame-rate.
5.
Use the CH-MUTE OPTION select buttons to make the
settings for the channel mute options.
The channel mute options are applied to all input channels.
Sends from POST FADER are always muted by the channel
muting, regardless of the channel mute option settings.
The BRIGHTNESS field of the SYSTEM screen is used to adjust the
brightness of the panel, and display.
1.
Access the SYSTEM screen.
fig.ScrSysBrightGuide.eps
PANEL knob
This adjusts the brightness of the panel buttons and meters.
DISPLAY knob
This adjusts the brightness of the display.
2.
Move the cursor to the PANEL knob, and use the value
knob to adjust the brightness of the panel buttons and
meters.
Higher values produce greater brightness.
3.
Move the cursor to the DISPLAY knob, and use the value
dial to adjust the brightness of the display.
Higher values produce greater brightness.
Adjusting the brightness of the panel
and display
21
1
2
M-300_e.book 153 ページ ２０１０年６月２４日 木曜日 午後２時２６分