Filter
Top Products
155
Other settings and functions
Other settings and functions
Saving/loading mixer settings
You can use USB memory to save or load mixer settings as a
project file. The LOAD/SAVE popup of the SYSTEM screen is used
to save or load mixer settings.
fig.ScrSysLoadSaveGuide.eps
Project file list
This lists the project file that are saved in USB memory.
By selecting a folder and pressing [ENTER], you can move
downward into that folder. By selecting “..” and pressing
[ENTER] you can move back to the folder above the current one.
LOAD SECTION select buttons
Use these buttons to select the sections for which you want
to load mixer settings.
You can select the following sections:
LOAD LIBRARY select buttons
Use these buttons to select the user libraries for which you
want to load mixer settings.
You can select following libraries:
The function buttons have the following operations:
1.
Access the SYSTEM screen.
fig.ScrSystem.eps
2.
Press [F3 (LOAD/SAVE)].
fig.ScrSysLoadSave.eps
The LOAD/SAVE popup will appear.
LOAD/SAVE popup
MIXER PARAMETER
Mixer parameters
SYSTEM SETTING System settings
SCENE MEMORY Scene memories
USER PREFERENCE User preference
CH Channel library
GATE Gate/Expander library
COMP Compressor library
LIMITER Limiter library
4-BAND EQ 4-band EQ library
AUX/MTX/MAIN AUX/MTX/MAIN library
8-BAND EQ 8-band EQ library
FX Effect library
IN PATCH Input patchbay library
OUT PATCH Output patchbay library
M-48 M-48 Library
2
1
3
1
2
3
[F1 (LOAD)]
Loads the project file that is selected in the list
(p. 156).
[F2 (SAVE)] Saves the current mixer settings as a project file
to USB memory (p. 156).
[F3 (NAME EDIT)] Opens the NAME EDIT popup where you can
edit the name of the project file selected in the
list (p. 157).
[F4 (DELETE)] Deletes the project file that is selected in the list
(p. 157).
[F8 (CLOSE)] Closes the popup.
Accessing the LOAD/SAVE popup
M-300_e.book 155 ページ ２０１０年６月２４日 木曜日 午後２時２６分