Filter
Top Products
133
User settings
User settings
Limiting the range of possible operations
You can limit the range of operations that are possible by editing
the user levels to correspond to the user settings.
You edit the user level at the USER LEVEL popup.
1.
Access the USER screen.
fig.ScrUser.eps
2.
From the user list, select the desired user.
You can’t specify the user level for ADMIN.
3.
Press [F5 (USER LEVEL)].
The USER LEVEL popup will appear.
This has three tabs: [F1 (CH 1-32)], [F2 (AUX/MTX/MAIN)] and
[F3 (OTHER)].
●
CH 1-32, AUX/MTX/MAIN tabs
fig.ScrUserAccessGuide.eps
Applicable user indication
This indicates the user settings to which the USER LEVEL
popup applies.
ADMIN button
Select this option if you want to give ADMIN privileges to the
user.
Parameter access permission buttons
These buttons select the parameters that the user will be
able to operate for the channels selected by the channel
access permission buttons. The parameters that are selected
here will be operable.
Channel access permission buttons
These buttons select the channels that the user will be able
to operate. The channels that are selected here will be
operable.
●
OTHER tab
fig.ScrUserAccessOthGuide.eps
Other parameter access permission buttons
These buttons select other parameters that the user will be
able to operate. The parameters that are selected here will
be operable.
The “TALKBACK/OSC” button in the OTHER PARAMETER ACCESS
PERMISSION section enables or disables operation of the
talkback/oscillator output-destination select button (p. 113).
The function buttons have the following operations:
Accessing the USER LEVEL popup
2
1
3
4
1
2
3
[F1 (CH 1–32)]
Accesses the CH 1–32 tab.
[F2 (AUX/MTX/MAIN)] Accesses the AUX/MTX/MAIN tab.
[F3 (OTHER)] Accesses the OTHER tab.
[F7 (CANCEL)] Cancels the changes and closes the popup.
[F8 (OK)] Confirms the changes and closes the popup.
4
5
5
M-300_e.book 133 ページ ２０１０年６月２４日 木曜日 午後２時２６分