Roland M-300 DJ Equipment User Manual


 
191
Appendix
Appendix
Error message list
Message
Explanation
xxx is directory.
You attempted to copy the xxx directory of the USB memory.
xxx is used for EXT FXx
Do you want to disable it?
Port xxx is being used by EXT FXx. Do you want to disable EXT FXx?
Cannot operate the USB memory.
It exceeds the power capability.
The device connected to the USB MEMORY connector used more than the maximum allowable electrical current.
Directory is not empty. You attempted to delete a non-empty directory in USB memory.
Internal battery is low. The internal lithium battery has run down.
Internal data were damaged.
M-300 starts with initialized setting.
Data was initialized because the internal memory data was lost when the internal lithium battery was depleted
or was replaced.
Invalid USER NAME. You attempted to assign a blank user name.
Media is abnormal. The USB memory has malfunctioned.
Media not formatted. The USB memory has not been formatted.
MIDI/RS-232C Rx Error
Framing.
An inappropriate signal is being input to MIDI/RS-232C.
MIDI/RS-232C Rx Error
Buffer Full.
Too much data is being received via MIDI/RS-232C.
Passwords do not match. The two passwords you entered to change the user password do not match.
REAC x Error
Fan Stop.
The cooling fan of the input/output unit connected to REAC x has stopped.
REAC x Error
Temp High.
The temperature of the input/output unit connected to REAC x has become abnormally high.
REAC x: Wrong sampling frequency. A REAC device whose sampling frequency is not supported by the M-300 is connected to REAC x.
The data is locked You attempted to edit a locked scene or library item.
The internal FAN has stopped. The cooling fan located on the bottom panel has stopped.
This operation is not allowed. You attempted to perform an operation that is prohibited by your user settings.
USB MIDI Rx Error
Buffer Full.
Too much data is being received via USB MIDI.
Now Playing/Now Recording You attempted to copy a file in USB memory while the USB memory recorder was playing or recording.
M-300_e.book 191 ページ 2010年6月24日 木曜日 午後2時26分