Filter
Top Products
88
Input/output patchbay
Input/output patchbay
When the M-300 is in its default state, the input patch bay is set as follows:
You can also use the EFFECTS screen to patch a effect output to a channel. For details, refer to “Using an effect via send/return” (p. 101).
You can also use the RECORDER screen to patch a USB memory recorder output to a channel. For details, refer to “Specifying the output-
destination for the USB memory recorder” (p. 126).
When the M-300 is in its default state, the output patchbay is set as follows:
Default setting of the input/output patchbay
Default settings of the input patchbay
Input channel
Input port
CH1–16
REAC A IN1–16
CH17–28 CONSOLE IN1–12
CH29–30 FX4 OUT L, R
CH31–32 PLAY L, R
Default settings of the output patchbay
Output port
Output
REAC A
or
REAC B
OUT1–6 AUX1–6
OUT7–8 MAIN L, R
OUT9–40 CH1–32 DIRECT OUT
CONSOLE OUT1–2 MAIN L, R
OUT3–4 MONITOR L, R
OUT5–8 AUX1–4
DIGITAL OUT L/R MONITOR L, R
M-300_e.book 88 ページ ２０１０年６月２４日 木曜日 午後２時２６分