Filter
Top Products
66
AUX, MTX, MAIN operations
AUX, MTX, MAIN operations
Noise may occur when you preview or recall a library item,
but this is not a malfunction.
The function buttons have the following operations:
For details on library operations, refer to “Library operations” (p.
37).
AUX/MTX/MAIN can be assigned to DCA groups and MUTE
groups. Assignments to DCA groups and MUTE groups are made
in the GROUP ASSIGN popup.
For details on GROUP ASSIGN popup, refer to “Assigning
channels to DCA groups and MUTE groups” (p. 53).
1.
Access the CHANNEL DISPLAY screen for the AUX to
which you want to copy the MAIN mix.
ig.ScrChAux.eps
2.
Press [F7 (COPY MAIN MIX)].
A confirmation message will ask you to confirm the
operation.
3.
Press [F8 (OK)] to copy the send amount from each input
channel to MAIN.
If you press [F7 (CANCEL)], the Copy operation will be
cancelled.
In the case of stereo-linked AUXes, the pan from each input
channel to MAIN will also be copied.
[F2 (PREVIEW)] Previews (auditions) the selected library data.
[F3 (NAME EDIT)] Accesses the NAME EDIT popup.
[F4 (RECALL)] Recalls the selected library data.
[F5 (STORE)] Stores the current settings into the selected
library data.
[F6 (CLEAR)] Clears the selected library data.
[F7 (LOCK)] Locks/unlocks the selected library data.
[F8 (CLOSE)] Closes the popup.
Assigning channels to DCA
groups and MUTE groups
Copying the MAIN mix
(AUX1–8 only)
M-300_e.book 66 ページ ２０１０年６月２４日 木曜日 午後２時２６分