Filter
Top Products
172
Management of the M-48 live personal mixer
Management of the M-48 live personal mixer
Making settings for an M-48 unit
1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired target
M-48 unit and press [F2 (SETUP)].
fig.ScrM48Setup_Guide.eps
The M-48 SETUP popup will appear.
Target M-48 indication
This indicates the M-48 unit that is the target of the settings.
This shows the same item as the M-48 list of the M-48
MANAGER popup.
Version number
This indicates the version of the target M-48 unit.
SOURCE LEVEL
fig.ScrM48SrcLev0.eps
This is an overview of the source levels. The approximate
levels of sources 1–40 are shown. You can also use the value
dial to adjust the level.
GROUP MIX (VOLUME)
fig.ScrM48GrpMix0_Guide.eps
This is an overview of the group mix volumes.
Group name
This indicates the group name. If you move the cursor here
and press [ENTER], the NAME EDIT popup will appear,
allowing you to edit the group name. You can enter a group
name of up to six characters.
Volume knob
This adjusts the group’s volume in a range of -Inf dB – +20.0
dB.
If no index markings are shown for a knob, this means that no
source has been assigned to that group.
The function buttons have the following operations:
You can assign a USER button to access this popup (p. 136).
3.
View the settings of the target M-48 unit.
You can use [F1 ( PREV UNIT)] or [F2 (NEXT UNIT )] to
move to a different unit.
Accessing the M-48 SETUP popup
System
System program version
Panel Panel program version
2
1
3
4
1
2
3
4
2
1
[F1 ( PREV UNIT)]
Changes the target M-48 unit. The target for
the settings will change according to the order
of the M-48 list in M-48 MANAGER.
[F2 (NEXT UNIT )]
[F3 (SOURCE LEV/PAN)] Accesses the M-48 SOURCE LEV/PAN popup,
where you can set the source level and pan (p.
175).
[F4 (SOURCE ASSIGN)] Accesses the M-48 SOURCE ASSIGN popup,
where you can specify source assignments (p.
178).
[F5 (GROUP MIX)] Accesses the M-48 GROUP MIX popup, where
you can make group mix settings (p. 181).
[F6 (PREF)] Accesses the M-48 PREFERENCES popup,
where you can make preference settings (p.
173).
[F7 (SOLO CLEAR)] Clears all group solo settings. If a group is
being soloed, this will be on (blue).
[F8 (CLOSE)] Closes the popup.
1
2
M-300_e.book 172 ページ ２０１０年６月２４日 木曜日 午後２時２６分