Filter
Top Products
145
REAC applications and settings
REAC applications and settings
Output Patchbay Operations (S-0808)
1.
Access the S-4000M CONFIGURATION popup.
2.
Press [F2 (OUTPUT)] to access the OUTPUT tab.
fig.S4M_Config_OUT_Guide.eps
Output Patchbay
This part displays overall view of the S-4000M’s output
patchbay. You can move the cursor to the Output Patchbay
and press [ENTER] to access the S-4000M OUTPUT
PATCHBAY popup.
3.
Move cursor to the desired Output Patchbay and press
[ENTER].
fig.S4000MOutputPatchbay.eps
The S-4000M OUTPUT PATCHBAY popup will appear.
Current assign indication
This indicates the channel that is patched to the physical
output at the cursor location.
Device indication
This indicates the REAC slave device that is that is the target
of the S-4000M OUTPUT PATCHBAY popup.
Patchbay grid
This grid lets you make patchbay settings.
fig.ScrOutPatGridGuide.eps
REAC channel indicator
This indicates the number and the signal level of the REAC
channels being sent from the M-300.
The color indicates the signal level as follows:
Output indication
This indicates the output numbers of the REAC slave device.
Patch symbol
A patch symbol is shown where the currently patched REAC
channel and output intersect. To change the patching, move
the cursor to the location where the desired REAC channel
and output intersect, and press [ENTER].
Unavailable area
The number area is shown in gray for outputs that cannot be
used with the currently connected REAC slave device.
The function buttons have the following operations:
4.
Move the cursor to the intersection of the desired REAC
channel and output, and press [ENTER].
1.
As described in step 1–3 of “Output Patchbay Operations
(S-0808)” (p. 145), access the S-4000M OUTPUT
PATCHBAY popup.
2.
Press [F6 (CLEAR)].
fig.S4M_PatchChgConf.eps
A confirmation message will ask you to confirm the
operation.
3.
Press [F8 (CLEAR)] to clear all assignments associated
with the currently selected S-4000M’s REAC port.
Pressing [F7 (CANCEL)] will cancel the operation.
1
1
2 34
2
3
4
1
2
3
4
Color Signal Level
Black Below -48dB
Green Between -48dB and -18dB
Yellow Between -18dB and 0dB
Red Above 0dB
[F6 (CLEAR)] Clear all assignments.
[F8 (CLOSE)] Closes the popup
Clearing all assignments
1
2
3
4
M-300_e.book 145 ページ ２０１０年６月２４日 木曜日 午後２時２６分