Filter
Top Products
183
Management of the M-48 live personal mixer
Management of the M-48 live personal mixer
M-48 memory operations
You manipulate M-48 memory using the M-48 MEMORY popup.
1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired M-48
MEMORY NO., and press [ENTER].
The M-48 MEMORY popup will appear.
There are two views: the SELECTED UNIT tab and the ALL
UNITS tab.
• SELECTED UNIT tab
fig.ScrM48Memory.eps
In this tab you can manipulate the memories of the M-48
unit that is selected in the M-48 list.
• ALL UNITS tab
fig.ScrM48MemoryAll.eps
In this tab you can manipulate the memories of all M-48
units (except for units whose MEMORY SAFE function is on).
fig.ScrM48Memory_Guide.eps
Target unit indication
This indicates the M-48 that is the target of memory
operations.
Memory list
This lists the memories of the target M-48 unit. The current
memory number is shown in green.
The list shows the following items:
* This is not shown in the ALL UNITS tab.
The function buttons have the following operations:
*1 Not shown in the ALL UNITS tab.
*2 Not available if [F7 (MEMORY SAFE)] is on.
Accessing the M-48 MEMORY popup
Item
Explanation
NO.
Indicates the memory number.
NAME Indicates the memory name.
*
[F1 (SELECTED UNIT)]
Shows the SELECTED UNIT tab.
[F2 (ALL UNITS)] Shows the ALL UNITS tab.
[F3 (NAME EDIT)]
*1 *2
Accesses the NAME EDIT popup where you can
edit the memory name.
[F4 (RECALL)]
*2
Recalls the memory number selected in the list
(p. 184).
[F5 (STORE)]
* 2
Accesses the M-48 MEMORY STORE popup,
where you can store to the memory number
selected in the list (p. 184).
[F6 (CLEAR)]
*2
Returns the contents of the memory selected in
the list to the default state (p. 184).
[F7 (MEMORY SAFE)]
*1
Turns MEMORY SAFE on/off for the target M-48
unit.
[F8 (CLOSE)] Closes the popup.
2
1
1
2
M-300_e.book 183 ページ ２０１０年６月２４日 木曜日 午後２時２６分