Filter
Top Products
64
AUX, MTX, MAIN operations
AUX, MTX, MAIN operations
If you turn [F1 (LINK to MAIN L/R)] on, you’ll be able to use the
MAIN fader to control MAIN L/R and MAIN C simultaneously,
while maintaining the fader balance between MAIN L/R and
MAIN C.
By default, [F1 (LINK to MAIN L/R)] is on.
Turning on [F1 (LINK to MAIN L/R)] also links the MAIN [SOLO]/
[MUTE] operation.
If you turn [F1 (LINK to MAIN L/R)] on, the MAIN fader always
controls MAIN L/R and MAIN C. To change the fader balance
between MAIN L/R and MAIN C, you need to turn [F1 (LINK to
MAIN L/R)] off.
1.
Access the CHANNEL DISPLAY screen for the MAIN C.
fig.ScrMainC.eps
Each time you press MAIN [SEL], it will select the MAIN L, MAIN
R, or MAIN C one after another.
2.
Press [F1 (LINK to MAIN L/R] to turn it on.
You can specify a channel name and color label for each AUX,
MTX, and MAIN. The channel name can be up to six characters,
and you can select one of eight colors as the color label.
Channel name entry and color label selection are done in the
NAME EDIT popup.
For details on NAME EDIT popup, refer to “Specifying a channel
name and color label” (p. 50).
Channel settings can be copied to another channel. Channel
copying is done in the AUX/MTX/MAIN COPY popup.
1.
Access the CHANNEL DISPLAY screen or the desired
copy-source channel.
ig.ScrChAux.eps
2.
Press [F3 (COPY)] to access the AUX/MTX/MAIN COPY
popup.
fig.ScrChCopyOutGuide.eps
Copy-source channel
This indicates the copy-source channel.
Copy parameter select buttons
Here you can select the parameters that will be copied. You
can select the following parameters:
Copy-destination channel select buttons
Here you can select the copy-destination channel(s).
Linking MAIN L/R and MAIN C
Specifying a channel name and
color label
Copying channel settings to
another channel
ATT
Attenuator
EQ 8-band EQ
Fader Fader
Balance Balance
LCR LCR button, CENTER (AUX only)
Limiter Limiter
Delay Delay
Group DCA groups and MUTE groups
TO Main To MAIN (AUX only)
2
1
3
1
2
3
M-300_e.book 64 ページ ２０１０年６月２４日 木曜日 午後２時２６分