Filter
Top Products
182
Management of the M-48 live personal mixer
Management of the M-48 live personal mixer
Copying M-48 settings
1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired copy-
source M-48 unit, and press [F3 (COPY)].
fig.ScrM48Copy_Guide.eps
The M-48 COPY popup will appear.
Copy-source unit indication
This indicates the copy-source M-48 unit.
Copy-destination list
Specify the copy-destination M-48 unit(s) in this list.
The list shows the following items:
Copy parameter select buttons
Use these to select the parameters to be copied. Parameters
for which there is a check mark will be copied.
The function buttons have the following operations:
3.
Verify that the copy-source unit indication shows the
desired M-48 unit.
If the wrong copy-source unit is selected, press [F8 (CLOSE)]
to close the popup, return to step 2, and select the desired
copy source.
4.
In the copy-destination list, add a check mark to the
desired copy-destination M-48 units.
Press [ENTER] to assign or clear a check mark.
You can use [F1 (MARK ALL)] or [F2 (CLEAR MARKS)] to assign or
clear check marks for all DEST fields in the copy-destination list.
5.
Use the copy parameter select buttons to select the
parameters that you want to copy.
6.
Press [F5 (PASTE)].
fig.ScrM48Copy_Conf.eps
A message will ask you to confirm the operation.
7.
Press [F8 (PASTE)].
The copy will be executed, and a message indicating the
processing status will appear. This message will close when
copying is completed.
Pressing [F7 (CANCEL)] will cancel the operation.
Item
Explanation
DEST
Press [ENTER] to add or clear the check
mark. A check mark indicates that the unit
is selected as a copy-destination.
NO. Indicates the number in the list.
UNIT NAME Indicates the unit name.
Item
Explanation
SOURCE LEV/PAN
Source level/pan settings
SOURCE ASSIGN Group assignment settings
PREFERENCES Preference settings
GROUP MIX Group mix
2
1
3
1
2
3
[F1 (MARK ALL)]
Adds a check mark to all DEST fields of the
copy-destination list.
[F2 (CLEAR MARKS)] Clears the check marks from all DEST fields of
the copy-destination list. This indication will be
on if any DEST fields have check marks.
[F5 (PASTE)] Executes the copy.
[F8 (CLOSE)] Closes the popup.
M-300_e.book 182 ページ ２０１０年６月２４日 木曜日 午後２時２６分